> After installed this program on PC1 then run it, select Menu Bar -->"Monitor" > --> "Define filter..." . > Then it will display a windows, select "address" tab, enter IP502H's WAN port MAC Address to "Station 1", enter "Any" to "Station2" . Then click "OK" to save settings. > > A: IP502H (502h.bmp) > 1. On PC1 - Sniffer, select Menu Bar --> "Capture" --> "Start" . > 2. On PC2, Goto IP502H's WAN status, click "Connect" button > 3. After problem occurred, "Capture" --> "Stop and Display" then you should see the packets > 4. Save these packets by "File" -"Save" > 5. Send file to us. > > B. PC's packet trace (PC.bmp) > PC1: run Sniffer program > PC2: log in ISP and surf Internet > 1. On PC1 - Sniffer, select Menu Bar --> "Capture" --> "Start" But you need to change the MAC address to PC2 NIC's in Menu Bar --> "Monitor" --> "Define filter..." first. > 2. Start the PPPoE Login program on PC2 and login to ISP. > 3. After the connection is established, Surf one web site on PC2. > 4. Then "Capture" --> "Stop and Display" on PC1, save the packets > 5. Send file to us. >