干掉红米Note取代MX4魅蓝Note评测

干掉红米Note取代MX4魅蓝Note评测 干掉红米Note/取代MX4,魅蓝Note评测 泡泡网手机频道12月24日 魅族昨天正式发布了魅蓝note，这款手机是魅族专为年轻用户推出的机型，用魅族白永祥的话说，那就是如果没有魅蓝，那么年轻人手中永远没有品质。这足以说明魅族对于魅蓝note品质上的自信。在发布会之后我们第一时间拿到了魅蓝note真机，下面我们就来看一下这款手机的表现如何。 相比于其他千元级智能手机，魅蓝note无论是在外形设计还是在硬件配置上确实更有优势。很多用户在第一眼看到魅蓝note的时候，都会戏称其为“魅蓝5c”，就是因为在风格上魅蓝note与iPhone5c有着非常相似的地方，但是iPhone5c的售价足以购买3部魅蓝note，这就是魅蓝note的优势所在，以较低的价格带给用户更高品质的体验。 side of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations 魅蓝note正式发布之后，很多魅族MX4用户也对这它非常感兴趣。确实，与魅族 MX4相比，魅蓝note在更年轻的同时质感也更出色，而且手机的价格极具吸引力，999 元的价格不算高。在此之前，红米Note在千元机中尚未遇到特别难磕的对手，而魅蓝n ote的出现，可能成为当前最值得推荐的千元智能手机之一。 side of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations 魅蓝note采用了5.5英寸显示屏，采用GFF全贴合技术，分辨率达到了1080P的水平，手机屏幕玻璃采用的是康宁第三代大猩猩玻璃，也能够对手机屏幕起到更好的保护。魅蓝note是当前为数不多采用1080P分辨率的千元智能手机，这点是值得肯定的。 何为GFF全贴合屏幕:GFF技术和OGS技术是两种屏幕贴合技术，贴合工艺不同。OGS技术比GFF技术更好。但是相对来说GFF全贴合技术良品率比较高，成本比较低，目前有多款手机是采用 GFF全贴合技术，国产小米2A就是其中之一。 在手机屏幕上方偏向圆角处有一枚500万像素前置摄像头，拥有F/2.0光圈以及69度的广角，这样的参数到说不上有多高端，处于中等水平，并没有发布会上说的那么厉害。魅蓝note的这枚前置摄像头用于自拍是没有问题的，配合手机的实时美颜功能， 自拍效果还是比较不错的。 side of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations 魅蓝note底部的设计仍然坚持了魅族的一贯设计风格，一个圆形的home键位于 底部中间位置，home键拥有白色的背光灯。home键操作上与之前的魅族手机相同，从h ome键处向上滑动就是返回功能，在底部靠左以及靠右向上滑动就可以打开多任务栏。 side of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations 魅蓝note选用了聚碳酸酯材质作为机身材料，之前能够将聚碳酸酯做出超高质感的只有iPhone5c，现在魅蓝note也算其一，圆润细腻的手感可以让手机的握感更加舒适。仅从材质方面评价，魅蓝note几乎与iPhone5c保持一致。 魅蓝note背部采用了1300万像素摄像头，拥有F2.2的光圈，配合手机的双色闪光灯，在拍照方面有着较为出色的表现。通过与之前的魅族MX4的拍照相比，在最终的成像效果上差距并不是很大。 魅蓝note拥有白、粉、黄、蓝、绿五种颜色，所有的颜色都是聚碳酸酯的原料本色，连手机的颜色都是经过魅族特殊定制的，为了让手机看起来更加灵动、通透，少了传统涂料的呆板。 side of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations 手机的音量键与开机键偏硬，按下后会有明显的“咔哒”声。手机的开机键位于 机身顶端，正常持握手机的时候，就无法按到手机的开机键，每一次按下开机键都需要 重新调整手机持握的姿势，这样的设计有些欠考虑。 side of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations 魅蓝note采用了单卡槽双卡设计，一个卡槽可以放入两张SIM卡，这样的设计非 常不错，可以将卡槽对手机外观的影响降到最低。不过在真机上看，SIM卡槽与机身并 不是严丝合缝，而且不够平整，可能是因为工程机的原因，希望在后期的量产版上能够 得以改进。 手机底部的所有孔位都是通过CNC精雕机完成，开孔细致，没有任何毛刺。 side of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations 为了保证手机的机身强度，魅蓝note中采用的是镁合金面板，同时该面板还是电池、相机、处理器等内部模组的载体，采用镁合金材质可以让机身更坚固，这样就可以避免塑料机身不够坚固的弊病。 魅蓝note在外观方面虽然会有小的瑕疵(如卡槽缝隙)，但是整体的表现仍然是相当不错的，给人的第一印象也很好，在999元的价位，魅蓝note的设计以及做工绝对能够排进前几名，用同事的话说，这款手机要是放在一年前，那卖2000左右也会有人买。需要注意的是，魅蓝note的后壳手感是非常好，但是却不耐刮，如果不加以保护，很可能用不了多久，手机后壳上就会布满划痕了。 对比红米Note与魅族MX4 side of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations 在魅蓝note的发布会上，我们可以很明显的感觉到魅族对于红米note的敌意， 或者可以说是对红米note的打压，在发布会上多次谈到红米，并且使用魅蓝与红米进 行赤裸裸的对比，结论也都是一边倒的情况，那么我们就来看下红米note与魅蓝note 之间的对比究竟结果如何。 side of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations 首先我们先来看下两部手机的外观，从屏幕正面来看，相信不用多说，大家就能 分辨出两部手机哪部更好看，魅蓝note秉承魅族良好的屏占比血统，不管是屏幕上下 还是左右边框收的都比红米note更好。 机器背部虽然魅蓝note有着与iPhone5c相似的设计语言，并且在外观上并没有 突破以往魅族的风格，但是与红米note相比，确实更好看，而且更时尚。 side of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations 在发布会结束之后，很多用户都表示，红米note与魅蓝note的外观相比，简直弱爆了。细节方面，魅蓝note的边框也要比红米note更窄，这也让手机的屏占比更大。 看完了与红米note的对比，我们再来看看魅蓝note与魅族MX4的对比，因为不少用户都认为魅蓝note比魅族MX4更值得购买，那么到底是不是这样呢, 虽然魅族MX4的外形大致上也都是塑料，但是手机的中框部分采用的是金属，这就让手机的机身相对更加坚固，而且拥有金属中框，也会使手机的质感更好。如果将魅族MX4与魅蓝note单拿出来看，魅族MX4的整机质感要更好。 side of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations 魅蓝note的屏幕比例终于变成正常的16:9，从使用习惯上来看要比魅族MX4的1 6:10更舒服，其他硬件方面，魅蓝note与魅族MX4的差距主要体现在处理器方面，魅 蓝note采用的是MT6752真八核处理器，频率为1.7GHz;魅族MX4采用的是MT6595双 4核处理器，最高频率为2.2GHz，毫无疑问，魅族MX4的性能要更加出色。 side of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations 至于魅族MX4与魅蓝note该如何选择，首先我们先来看差价，一部魅族MX4要比魅蓝note贵了800元，几乎是两部魅蓝note的价格，主要就是在机身质感以及性能方面有些优势，你觉得这些差距能值800元么,如果是我来选择，那么我会选择价格更低的魅蓝note。 如此看来，魅蓝note的出现应该会对魅族MX4的销量产生一定的影响。不过从另外一方面考虑，魅蓝note的出现进一步的下探了魅族手机的售价，也会让更多低消费用户有新的选择，与影响魅族MX4销量相比，魅蓝note开拓新市场带来的影响要远远大于对魅族MX4的影响。 side of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations 用魅蓝note与红米note相比目前来看已经有些不对等了，毕竟红米note已经推出了相当长的一段时间，两者之间的发布时间差距较大，赢了也是理所应当的。至于魅蓝note与魅族MX4该如何选择，简单的说，如果预算不足，那就直接魅蓝note吧，如果预算还算充足，也就跳过魅族MX4，直接考虑魅族MX4 Pro吧。 Flyme流畅度表现很好 魅蓝note作为一款千元机产品，广大消费者除了关注它的机器外观以及性能之外，对系统操作也是尤其关心，该机使用目前魅族最新的Flyme 4.1系统，与MX4 Pro使用的版本相同，4.1更多的是对稳定性以及细节深度优化。 side of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations 魅蓝note所使用的Flyme 4.1系统界面、功能方面与魅族MX4 Pro所使用的Fly me 4.1除了没有指纹识别功能之外，基本一致，默认壁纸以及主题可以清晰看到Flyme 独有简洁气质。 side of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations 主界面依然采用绿色渐变式色块壁纸，本次体验我们换了一张更加漂亮的默认壁 纸，整体视觉感受更符合魅蓝note的气质。 后台窗口采用了毛玻璃设计，更加漂亮。下拉菜单依然保持Flyme4.0风格，向下 滑动即可打开所有快捷工具，其中包括全新功能悬浮球。开启此功能后会在屏幕出现一 个球形图标，大家只需在此滑动即可快速呼出后台应用程序以及下拉菜单，双击可以完 成下拉悬停功能，特别实用。 side of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations 魅蓝note配备了双卡双待功能，这也是首款具备双卡双待能力的魅族手机。在拨 打电话界面时可选择主副卡进行拨打电话。 side of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations 打开音乐时，我们可以看到屏幕上方的黑条会进行一体式整合，更加大气自然。 side of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations side of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations Flyme4.1在软件界面上更加简洁漂亮，天气功能有一些小变化，可以随着白天与 夜晚显示不同的界面效果。 side of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations Flyme4.1同样拥有安全中心软件，有了它基本无需再安装第三方同类型软件，在 权限管理功能上也很强大。 side of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations side of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations 系统总结:通过体验与介绍，魅蓝note所使用的Flyme 4.1在流畅度方面表现很 好，滑动过程中没有卡顿，这一点让小编很吃惊，甚至在滑动操作时流畅度比MX4还要 好，除此之外Flyme4.1依然保持清新个性的风格，扁平化设计十分讨巧，在功能方面F lyme 4.1的表现也很强大，音乐、视频等功能与各大厂商资源进行整合，日常操作体验 会更加便捷。 >>魅蓝note 5.5英寸1080P精致新品来袭 999元【点击预约(1561人感兴趣)】 side of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations 1300万摄像头 拍照效果满足日常需求 魅蓝note使用了一颗三星1300万像素摄像头，在摄像头下方备有双色温闪光灯， 支持全尺寸零延时拍照等功能，除此之外该机前置摄像头像素为500万，F/2.0超大光 圈，支持面部曝光增强技术。对于一款千元机来说，摄像头参数方面十分诱人，拍照效 果到底如何，接下来我们看一组拍照样张来看看魅蓝note的成像效果。 side of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations side of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations side of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations side of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations side of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations side of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations side of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations side of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations side of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations 通过以上几组拍照样张我们可以看到，魅蓝note整体的成像效果还是很不错的， 不过从拍照过程中来看，成片率还需要一定优化，与魅族MX4对比时魅蓝note在弱光 环境下取景会有一定延迟，这是目前唯一发现的缺点。总的来说该成像效果对得起999 元售价。 >>魅蓝note 5.5英寸1080P精致新品来袭 999元【点击预约(1561人感兴趣)】 64位真八核 性能优异超乎想象 side of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations 如今千元机阵营配置方面越来越强，本次魅蓝note采用了目前最新的64位MT67 52真八核处理器，它采用了8颗A53架构核心搭配Mali-T760 MP2双核GPU，无论是运 行日常应用还是大型游戏，都有如丝绸般顺滑的舒适体验。而MTK独有的核心调配技术， 让8颗核心依据使用场景自动唤醒，保证每一格电量都用得恰到好处。说了这么多魅蓝 note性能如何，接下来让我们通过几组测试来了解下该机性能。 side of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations 通过安兔兔跑分软件来看，魅蓝note分值为41453分，这个分数在同价位中属于 超高水准，这也再一次证明64位MT6752真八核处理器性能表现的确很不错。 side of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations side of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations 魅蓝note在与魅族MX4对比时分值相差比较多，不过通过我们正常体验情况来看 视频、刷微博以及玩大型游戏时魅蓝note都能轻松运营畅玩，但玩游戏时在读取数据 过程中比MX4相对慢一些。其它分值方面与小米4对相差仅1000分，999元的机器可以 与1999元小米4分值抗衡的确出乎意料，当然跑分仅供参考。接下来我们在做一下其 它性能测试。 side of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations side of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations 在测试大型游戏狂野飙车8时，魅蓝note能够轻松并且流畅玩该游戏，没有明显 掉帧现象，但游戏读取速度对比MX4时要稍慢一点，进入游戏后两者都能完美运行，性 能不分上下。 时下热门网络游戏 全民奇迹 完美流畅运行。 side of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations 时下热门网络游戏 天下HD 完美流畅运行。 除了大型单机游戏之外，我们还对魅蓝note测试了当下流行的两款网络游戏，均 能完美流畅运行。999元保证你游戏需求完全没问题，当然如果是近期新出的大型单机 游戏在流畅度方面有欠缺，毕竟这是一台千元机，但主流游戏和网络游戏都没有问题， 可以满足你日常游戏需求。 side of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations side of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations 视频方面我们测试了1080P高清MV，完美流畅播放，自带的在线视频也可以轻松播放，但有一个问题，在播放在线电影《狄仁杰之通天帝国》时影片尺寸被拉伸，并没有找到还原视频播放比例的选项，Flyme系统还需要在一定细节方面进行优化。 总结:通过本篇评测文章大家也可以看到魅蓝note整体的实力，回归文章标题话题，魅蓝note绝对完胜红米note，这是很正常的事情，两款机器相比虽然都是千元机，但上市时间不同，导致产品差异性比较大，但魅蓝note与同时期千元机相比绝对是目前最好的机器。与魅族MX4相比其竞争能力也很可怕， 甚至很多性能方面有超过魅族Mside of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations X4，差价800元定位还是有所不同，买到魅族MX4的消费者不要过多纠结，反而如果你 在两者考虑的情况下，小编更建议大家买魅蓝note。 魅族千元机正式来袭，虽然近期魅族产品争议很大，但我们不难看到，魅蓝note 的确做出优质千元机的表现，这也是目前魅族产品定位最明确的一款产品，魅蓝的出现 很可能让千元阵营由性价比走入精品路线，999元魅蓝note你值得拥有。? side of road subgrade 2m. Direct-buried cable upper and lower should be covered with not less than 100mm thick layer of soft soil or sand, and affix the protection, the coverage should be wider than 50mm on each side of the cable, cover plate can be used to protect concrete or brick. Direct-buried cable in line every 50-100 meters, cable turns should be appreciable bearing flags or stakes. Direct-buried cable prior to backfill, shall be subject to acceptance of concealed work before they can be filled. 4.1.5 4.1.5.1 factory of making cable terminal cable mainly in the low-voltage cable head, dry Pack, its production should strictly abide by the production process. 4.1.5.2 should check the insulation before the first cable production qualified, low-voltage power cables with 1000V shake table, its insulation value should not be less than the specified value. 4.1.5.3 making cable head, cut from the Strip begins continuous operation until the completion of the cable, reducing insulation exposure time, strip-cut cables, insulation should not damage conductors and reservations. The armored power cable and control cable shield should be connected to a good shall not be interrupted, and ... Correctly positioned, vertical clearance shall be distributed evenly per shell bus and the shell should be concentric, the error shall not exceed 5mm, segments and segment connection, two adjacent bus and enclosure, after connecting bus and enclosure should not be subject to mechanical stress. Short circuit between phases of the shell plate is correctly positioned, good connection between support plates shall be mounted firmly, insulation Grade insulation shell should be made. 4.1.11 the installation of explosion-proof electrical equipment 4.1.11.1 rectisol wash unit area, tank farm and other explosion-proof areas, the electrical installation shall be carried out as explosion-proof requirements. 4.1.11.2 electrical installations