中国互金协会成立 凤凰金融成为首批会员

中国互金协会成立 凤凰金融成为首批会员 摘要:3月25日，中国互联网金融协会于上海成立，凤凰金融成为协会首批会员。 2016年3月25日，业内颇为关注的“中国互联网金融协会成立暨第一次会员代表大会”于上海揭幕。现场看点除了出席会议的上海市长杨雄、央行副行长潘功胜和银监会、证监会、保监会、民政部等监管部门重要领导及金融届的学术大咖外，应邀参会的协会会员代表亦颇受外界关注。据了解，这些会员代表不仅有银行、证券、保险、基金界的企业，还有近年起来的互联网金融新秀。凤凰金融作为互联网金融的黑马，不仅成为协会首批会员，总裁张震更以会员代表身份出席第一次会员代表大会。 中国互联网金融协会是经国务院批准，由中国人民银行、银监会、支付清算协会、证监会等牵头组建，旨在对互联网金融(ITFIN)行业进行自管理的央行下属一级协会。业内人士认为，中国互联网金融协会具有较高的权威和社会影响力，因此对会员的要求会非常严格，但同时，会员具有较高的含金量，是衡量企业或单位的行业地位的重要参考。 值得关注的是，凤凰金融获得大会认同，成为协会首批单位会员。在业内，凤凰金融属于较年轻的互联网金融公司，但战绩却不容小觑，在短短一年多的时间内，平台总交易额已突破120亿，实现A轮融资8000万美元，并且至今全部项目均实现0违约、0逾期。据悉，凤凰金融致力于打造两大核心优势:一是为全球华人搭建高品质的金融产品平台;二是为投资者提供卓越的智能金融服务。业内人士认为，凤凰金融的创新模式，给行业注入了新的活力。 大会上，协会会员代表还审议和表决了协会章程、自律公约、倡议书、会员及会费#管理办法#等协会基础办法。专业人士相关条文发现，协会对会员的要求极高，要全部做到并非易事。凤凰金融的张震认为:“作为这些和制度的第一批践行者，我们身上不仅拥有光环，更有责任。” 据了解，自成立至今，凤凰金融坚持以行业最高为自身发展准则，而且这些准则也契合了《中国互联网金融协会会员自律公约》中对风险管理、客户资金安全、Ellipticity of elbow pipes with diameters less than or equal to 150 mm must be not greater than 8% diameter of 200 mm or less shall not be greater than 6%. Wall thickness of the pipe wall thinning rate must not exceed the original 15%. Crease roughness: diameter 125 mm or less, shall not exceed 3 mm diameter less than or equal to 200 mm, not more than 4 mm. 7.3.9 simmering bending production of square steel tube extension, to use the whole tube bending. Interface if necessary, the welding position should be located in the middle of the vertical arm. 7.3.10 install expansion joints should be done. If design is not required, pipe compensator lengthen should conform to the requirements in the following table: square scale length δ x is equal to 1/2. Pre stretch tolerance: casing + 5 mm, +10 mm. 7.3.11 pipe form, location, spacing shall meet the design and specifications. 7.3.12 piping on back or return pipe at higher levels of the upper to automatic valve to install a drain valve below the horizontal parts. 7.3.13 supports and hangers of checks and the number 1) hanger installed must be checked before installation of supports and hangers part models, specifications of springs setting values, whether the materials meet the requirements of drawings and documents; 2) supports and hangers of material, size and accuracy shall conform to the provisions of the design drawings, material technical requirements should be consistent with national standards, industry standards and technical requirements related to the alloy spectrum review should be carried out; 3) pipe supports and hangers part plant product quality certificate for each variable spring supports, constant support hangers, dampers, damper function, there should be factory calibrated test 用户信息安全保障等方面的要求，如联合顶尖的各类金融机构，甄选优质金融产品，从源头上控制平台产品的金融风险;同时，平台不设资金池，真正实现第三方资金托管;此外，凤凰金融已通过CFCA(中国金融认证中心)金融安全认证，为用户提供高安全级别的电子签章保障，搭建可靠的金融服务平台。 随着会议降下帷幕，互联网金融崭新的篇章悄然翻启。中国互联网金融协会的成立，是行业发展的标志性事件，它将在未来很长一段时间内，指引行业发展的方向，翻开行业自律和规范发展的新篇章。 投哪网 ，由深圳投哪金融服务有限公司运营，于2012年5月4日青年节在深圳市工商局注册成立。 公司简介 投哪网,由深圳投哪金融服务有限公司运营，于2012年5月4日在深圳市工商局注册成立，深圳市福田区香蜜湖香梅路中投国际商务大厦A栋3-5层。 公司主要从事P2P网络借贷服务，是一家集电子商务服务、投资理财服务、网络商城等互联网服务为一体的综合性公司。公司秉承快乐、共享、互助的理念，针对80后投资人群特点，结合P2P小额借贷金融模式，汇聚多位相关业内精英，打造全国首家80后P2P网络借贷平台——投哪网。旨在为民间80后借款人满足其资金周转需要，同时为80后投资人开创理财之路，是一个安全、专业、高效、透明的互联网理财平台。 2014年6月，投哪网获得广发证券全资子公司和直投平台广发信德的战略投资，同时与其母公司广发证券达成战略合作关系 Ellipticity of elbow pipes with diameters less than or equal to 150 mm must be not greater than 8% diameter of 200 mm or less shall not be greater than 6%. Wall thickness of the pipe wall thinning rate must not exceed the original 15%. Crease roughness: diameter 125 mm or less, shall not exceed 3 mm diameter less than or equal to 200 mm, not more than 4 mm. 7.3.9 simmering bending production of square steel tube extension, to use the whole tube bending. Interface if necessary, the welding position should be located in the middle of the vertical arm. 7.3.10 install expansion joints should be done. If design is not required, pipe compensator lengthen should conform to the requirements in the following table: square scale length δ x is equal to 1/2. Pre stretch tolerance: casing + 5 mm, +10 mm. 7.3.11 pipe form, location, spacing shall meet the design and specifications. 7.3.12 piping on back or return pipe at higher levels of the upper to automatic valve to install a drain valve below the horizontal parts. 7.3.13 supports and hangers of checks and the number 1) hanger installed must be checked before installation of supports and hangers part models, specifications of springs setting values, whether the materials meet the requirements of drawings and documents; 2) supports and hangers of material, size and accuracy shall conform to the provisions of the design drawings, material technical requirements should be consistent with national standards, industry standards and technical requirements related to the alloy spectrum review should be carried out; 3) pipe supports and hangers part plant product quality certificate for each variable spring supports, constant support hangers, dampers, damper function, there should be factory calibrated test 投哪由来 投哪网 ，前身系获得中国网络借贷金融服务十大影响力品牌的融信财富。创始人吴显勇毕业于北京大学，获得北大、香港大学经济学和金融学双硕士。2008年加入申银万国证券投资银行部，2010年创立投资公司任总裁，2012年创立融信财富。作为80后创业一代，吴显勇被许多媒体称为互联网金融界的新秀。 投哪网的另一位创始人李志刚，同为80后，系吴显勇的大学同学，毕业后曾在武当资产管理公司投资研究部、平安大华基金管理公司投资研究部任职。两人对互联网金融前景看好，共同投身于P2P网络借贷行业。 中途投资入股投哪网的诸葛鹏，是一位拥有海外留学及工作背景，在招商银行有多年工作经验的80后。 吴、李、诸葛均为80后，对于80后创业、梦想、财富和友谊有着深刻的理解。 为了迎合80后群体的理财需求，解决他们的理财、融资问，三人联手打造契合当代80后特性的P2P网络借贷平台，投哪网就此诞生。 品牌理念 快乐、分享、互助 你分享，我快乐，互助共赢创收益。 发展历程 Ellipticity of elbow pipes with diameters less than or equal to 150 mm must be not greater than 8% diameter of 200 mm or less shall not be greater than 6%. Wall thickness of the pipe wall thinning rate must not exceed the original 15%. Crease roughness: diameter 125 mm or less, shall not exceed 3 mm diameter less than or equal to 200 mm, not more than 4 mm. 7.3.9 simmering bending production of square steel tube extension, to use the whole tube bending. Interface if necessary, the welding position should be located in the middle of the vertical arm. 7.3.10 install expansion joints should be done. If design is not required, pipe compensator lengthen should conform to the requirements in the following table: square scale length δ x is equal to 1/2. Pre stretch tolerance: casing + 5 mm, +10 mm. 7.3.11 pipe form, location, spacing shall meet the design and specifications. 7.3.12 piping on back or return pipe at higher levels of the upper to automatic valve to install a drain valve below the horizontal parts. 7.3.13 supports and hangers of checks and the number 1) hanger installed must be checked before installation of supports and hangers part models, specifications of springs setting values, whether the materials meet the requirements of drawings and documents; 2) supports and hangers of material, size and accuracy shall conform to the provisions of the design drawings, material technical requirements should be consistent with national standards, industry standards and technical requirements related to the alloy spectrum review should be carried out; 3) pipe supports and hangers part plant product quality certificate for each variable spring supports, constant support hangers, dampers, damper function, there should be factory calibrated test 新华网深圳5月31日电(记者吴燕婷)31日，互联网金融平台投哪网在深圳宣布完成1(5亿元B轮融资。 创始团队 吴显勇 CEO 北京大学和香港大学经济学和金融学双硕士学位。2008年加入申银万国证券投资银行部，2010年创立投资公司任总裁。2012年创立融信财富。2013年创立投哪金融服务有限公司。 李志刚 VP 北京大学和香港大学经济学和金融学双硕士学位。曾任职于深圳市武当资产管理公司投资研究部，平安大华基金管理公司投资研究部。 诸葛鹏 VP 清华大学和英国爱丁堡大学管理学学士和金融学硕士。曾先后就职于招商银行及其全资投行招银国际金融有限公司。 平台原理 投资 任何人均可由网站注册成为投哪网平台用户，经实名认证后开始投资。享受50元超低门槛，并获得15%左右的年化收益。资金直接充值入第三方支付专属账户，确认后转至借款人账户，按期还款后利息为所获收益。 借款 Ellipticity of elbow pipes with diameters less than or equal to 150 mm must be not greater than 8% diameter of 200 mm or less shall not be greater than 6%. Wall thickness of the pipe wall thinning rate must not exceed the original 15%. Crease roughness: diameter 125 mm or less, shall not exceed 3 mm diameter less than or equal to 200 mm, not more than 4 mm. 7.3.9 simmering bending production of square steel tube extension, to use the whole tube bending. Interface if necessary, the welding position should be located in the middle of the vertical arm. 7.3.10 install expansion joints should be done. If design is not required, pipe compensator lengthen should conform to the requirements in the following table: square scale length δ x is equal to 1/2. Pre stretch tolerance: casing + 5 mm, +10 mm. 7.3.11 pipe form, location, spacing shall meet the design and specifications. 7.3.12 piping on back or return pipe at higher levels of the upper to automatic valve to install a drain valve below the horizontal parts. 7.3.13 supports and hangers of checks and the number 1) hanger installed must be checked before installation of supports and hangers part models, specifications of springs setting values, whether the materials meet the requirements of drawings and documents; 2) supports and hangers of material, size and accuracy shall conform to the provisions of the design drawings, material technical requirements should be consistent with national standards, industry standards and technical requirements related to the alloy spectrum review should be carried out; 3) pipe supports and hangers part plant product quality certificate for each variable spring supports, constant support hangers, dampers, damper function, there should be factory calibrated test 个人及小微企业主可由线上或线下两个渠道申请融资，需提供个人资产信息、相应流水单据 等等材料用以初步审核。经初审、复审、现场考核、抵押相关手续办理等环节后发布借款标 筹集资金。按期还款，珍视个人信用记录。 Ellipticity of elbow pipes with diameters less than or equal to 150 mm must be not greater than 8% diameter of 200 mm or less shall not be greater than 6%. Wall thickness of the pipe wall thinning rate must not exceed the original 15%. Crease roughness: diameter 125 mm or less, shall not exceed 3 mm diameter less than or equal to 200 mm, not more than 4 mm. 7.3.9 simmering bending production of square steel tube extension, to use the whole tube bending. Interface if necessary, the welding position should be located in the middle of the vertical arm. 7.3.10 install expansion joints should be done. If design is not required, pipe compensator lengthen should conform to the requirements in the following table: square scale length δ x is equal to 1/2. Pre stretch tolerance: casing + 5 mm, +10 mm. 7.3.11 pipe form, location, spacing shall meet the design and specifications. 7.3.12 piping on back or return pipe at higher levels of the upper to automatic valve to install a drain valve below the horizontal parts. 7.3.13 supports and hangers of checks and the number 1) hanger installed must be checked before installation of supports and hangers part models, specifications of springs setting values, whether the materials meet the requirements of drawings and documents; 2) supports and hangers of material, size and accuracy shall conform to the provisions of the design drawings, material technical requirements should be consistent with national standards, industry standards and technical requirements related to the alloy spectrum review should be carried out; 3) pipe supports and hangers part plant product quality certificate for each variable spring supports, constant support hangers, dampers, damper function, there should be factory calibrated test