本
已经通过答辩,如果需要图纸请联系QQ 251133408 佳文设计@佳效为您服务,专业团队代做毕业设计,质量速度有保证。下面是整个内容简介、目录、任务书、图纸量信息、字数统计等。
毕业论文(设计)任务书
论文(设计)题目: 18t桥式起重机设计
学号: 姓名: 专业: 机械设计制造及其自动化
指导教师: 系主任:
一、主要内容及基本要求
最大起升重量:18t 梁跨度:31500mm 起升速度:18~28m/min
起升高度:14m 起重机运行速度:80~95m/min
起升机构运行速度40~45 m/min
基本要求:
1 根据上述要求,设计桥式起重机;
2 设计计算说明书1份;
3 总装配图1张,小车装配图1张,小车架结构图1张,
18t桥式起重机总电路原理图1张;
4 英文资料翻译,3000单词左右
二、重点研究的问题
1结构设计(小车运行 起升机构);
2
选择、主要参数的选择等;
3各种强度计算和校核(如有未知条件可按通用机械方式自行设定);
4总电路电气原理的理解
5 设计和制图表达。
三、进度安排
序号
各阶段完成的内容
完成时间
1
知识准备
1~2周
2
总体技术
设计及计算
3~4周
3
总装配图绘制
5~7周
4
拆化零件图,详细设计
8~11周
5
纂写设计计算说明书,准备答辩
12周
四、应收集的资料及主要参考文献
[1] 机械设计
编委会主编,机械设计手册·起重运输机械零部件、操作件和小五金.北京:机械工业出版社,2007,3
[2] 严大考、郑兰霞主编,起重机械.郑州:郑州大学出版社,2003,9
[3] 余维张主编,起重机械检修手册.北京:中国电力出版社,1998,11
[4] 杨长睽,傅东明主编,起重机械(第2版).北京:机械工业出版社,1992,5
[5] 机械设计手册编委会主编,机械设计手册.北京:机械工业出版社2007,2
目 录
1摘要
3第一章 绪论
31.1桥式起重机的简介
31.2普通桥式起重机的主要组成部分
31.2.1 大车
31.2.2 小车
31.2.3动力装置和控制系统
31.3普通桥式起重机的运行方式
5第二章 设计任务及技术参数
52.1主要技术参数:
52.2起重机工作机构的级别:
6第三章 18吨桥式起重机的控制系统设计
63.1控制电路设计
63.1.1控制对象分析及控制元件的确定
63.1.2控制系统的基本要求
63.1.3电动机的工作状态分析
93.1.4起重机的供电
93.2起升机构控制电路工作原理
93.2.1起升机构电路的特点
103.2.2起升机构电路的保护与联锁
113.2.3起升机构电气工作控制原理
143.3小车运行机构电路工作原理
143.3.1小车运行机构电路工作特点
143.3.2小车运行机构的电气控制原理
163.4大车运行机构电路工作原理
163.4.1大车运行机构电路的工作特点
163.4.2大车运行机构的电气控制原理
183.5保护电路的工作原理
183.5.1保护电路的组成
183.5.2保护电路的工作过程
20结束语
21参考文献
22附录一
27附录二
18t桥式起重机设计
摘要:
桥式起重机是一种提高劳动生产率重要物品搬运设备,主要适应车间物品搬运、设备的安装与检修等用途。我国生产的吊钩电动双梁桥式起重机额定起重范围为5~500t,一般10t以上,起重机有主、副两套起升机构;300t以上,起重机还有三套起升机构。
电动双梁起重机由桥架、小车运行机构、大车运行机构和电气设备构成。在系统整体设计中采用传统布局的典型结构,小车运行机构采用集中驱动。起升机构滑轮组采用双联滑轮组,重物在升降过程中没有水平移动,起升过程平稳,且钢丝绳的安装和更换容易。相应的卷绕装置采用单层卷筒,有与钢丝绳接触面积大,单位压力低的优点。在起升机构中还涉及到钢丝绳、减速器、联轴器、电动机和制动器的选择等。小车运行机构中涉及小车轮压计算、小车车轮、小车轨道、减速器、联轴器、电动机和制动器的选择计算等。
在起重机控制方面,起升机构用主令控制器和磁力控制屏来实现控制,大、小车运行机构用凸轮控制器直接控制。在控制系统设计中,主要针对起升机构、大车运行机构、小车运行机构电路控制系统的设计及保护电路的设计。利用低压电气元件控制起重机,其使用寿命较长,适合车间恶劣环境。
关键词:桥式起重机 节点控制器 电气控制系统
ABSTRACT
Bridge crane is a significant increase labor productivity goods handling equipment, primarily to carry goods workshops, equipment installation and maintenance, and other purposes. China's production of electrical hook rated double-beam bridge crane lifting the range of 5 ~ 500 t, generally more than 10 t, cranes are the main, two sets of lifting300 t above, there are three sets of cranes lifting bodies.
Two-electric beam from the bridge crane, the trolley running, traveling mechanism and electrical equipment constituted. The overall design of the system using the traditional layout of the typical structure and operation of institutions used car driven focus. Pulley group or agency from using double-pulley blocks, heavy objects in the process of lifting the level of no movement, or from the process smooth, and the installation and replacement of wire rope easily. Winding installations in the corresponding single reel, a large area of contact with the rope, the advantages of low pressure units. In lifting bodies also involves rope, reducer, couplings, electrical and brake the choice. Vehicles involved in the operation of institutions pressure on the wheels, car wheels, car track, reducer, couplings, electrical and brake the choice of calculation.
In the crane control, or from the institutions with the main controller and magnetic control of the screen to achieve control, big and small car cam controller running institutions with direct control. In the control system design, mainly for lifting bodies, traveling mechanism, the car run institutions circuit design and control system for the protection of the circuit design. Use of low-voltage electrical components control crane, a longer service life for workshop harsh environment.
Key words: Bridge crane Node Controller Electric control system
第一章 绪论
1.1桥式起重机的简介
桥式起重机是生产车间、料场、电站厂房和仓库中为实现生产过程机械化和自动化,减轻体力劳动,提高劳动生产率的重要物品搬运设备。它通常用来搬运物品,也可用于设备的安装与检修等用途。桥式起重机安装在厂房高处两侧的吊车梁上,整机可以沿铺设在吊车梁上的轨道纵向行驶,而起重小车又可沿小车轨道(铺设在起重机的桥架上)横向行驶,吊钩则作升降运动。因此,它的工作范围是其所能行驶地段的长方体空间,正好与一般车间形式相适应。
PAGE