电脑开机要按F1的解决方法

电脑开机要按F1的解决方法 Because your replacement initialization of the BIOS settings in CMOS, the default boot floppy drive, but now the floppy drive has been eliminated, the machine did not. You will be prompted for errors. If you need to skip, press F1. The solution is to turn on the machine, press the DEL button, enter the CMOS settings, and find the word "FLOPPY" in the first major item. This is the floppy disk drive, and press enter to select NONE. Then press F10 to save the settings and make sure you restart them. Award 6 boot no longer press F1 1, restore or optimize the BIOS settings. Open the computer or restart your computer, press the "Del" button to enter the BIOS settings interface in BIOS main interface, using the keyboard arrow keys up or down "Load Fail-Ssfe Defaults" (load security default), or "Load Optimized Defaults" (load optimization value), press the ESC button to return to the main interface, select Save&Exit Setup (storage and exit), press Y to save and exit BIOS settings. 2, turn off the floppy drive. Enter BIOS, find the Standard CMOS Features (standard CMOS feature), press enter, in the open interface, change the Drive A:1.44 3.5in to None (off).. 3, does not enable the floppy drive check function. Enter BIOS, find Advanced, Bios, Features (advanced BIOS parameter settings), press enter to enter the Advanced Bios Features interface, in the open interface, Boot Up, Floppy, Seek, set to "Disabled"". 4 、 quick start self test. Enter BIOS, find the Advanced Bios Features (advanced BIOS parameter settings), press enter to enter the Advanced Bios Features interface, in the open interface, Quick power On, Self, Test, set to "Enabled"". 5, the hard disk is set as the first boot. Restart, press Del into BIOS, find the Advanced Bios Features (advanced BIOS parameter settings), press enter to enter the Advanced Bios Features interface, the First Boot Device set to HDD-O (hard disk start). Save and exit. AMI 8 boot no longer press F1 1, set BIOS to factory default. Press DEL to boot into the BIOS settings in BIOS main interface, using the keyboard arrow keys to choose the "Exit" in the Exit interface using the keyboard arrow keys to select "Load Setup: = Defauits (load security default) - according to F10-" OK "- enter - save and exit BIOS settings. 2, turn off the floppy drive. Press DEL to boot into the BIOS settings in BIOS main interface, using the keyboard arrow keys to select the "Main" in the Main interface using the keyboard arrow keys to select "Legacy Diskette A down arrow", the white - - enter into the "Options" dialog - using the keyboard arrow keys down arrow and select "Disabled" - enter. 3, set error messages. In the BIOS main interface, using the keyboard arrow keys to select the "Boot" in the Boot interface using the keyboard arrow keys to select "Boot Settings Configuration down arrow", the white - enter - "Boot Settings Configuration" interface using the keyboard arrow keys down arrow "Wait For" F1 "LF ERROR", the the white - - enter into "Options" - the dialog box using the keyboard arrow keys down arrow and select "Disabled" - enter. 4, set the keyboard prompt. Using the keyboard arrow keys down arrow and select "Hit" DEL "Message Display", the white - - enter into "Options" - the dialog box using the keyboard arrow keys down arrow and select "Enabled" - enter. 5, set up quick start. Using the keyboard arrow keys down arrow and select "QuickBoot", the white - - enter into "Options" - the dialog box using the keyboard arrow keys down arrow and select "Enabled" - enter. 6, the hard disk is set as the first boot. Restart your computer, press Del to enter the AMI BIOS setup program main interface - at the top menu with the left key, select the "Boot" - enter - in the open interface with key up / down select "Boot Device Priority" the white - Boot Device Priority - enter in the interface by using the up / down button "1st Boot Device, the white - enter - up / down button in the" options "dialog box, select the" ST...... AS, there's PM-ST...... Some Hatd, Dtive "(hard disk), the white - enter - you can see the" 1st Boot Device ", has become the first boot disk boot - press F10- to select OK- enter, save and exit setup. When you turn on the machine, press F1, which is caused by the wrong BIOS setting. Generally caused by the following circumstances: 1, no floppy drive, but enable the floppy drive, floppy drive can be disabled: Boot, press DEL into BIOS, select: STANDARD CMOS FEATURES, the following DRIVE A: set to None DRIVE B: set to None, press F10 to save, and enter Y to enter. 2, does not enable the floppy drive check function. Boot, press DEL into BIOS, select: Advanced, Bios, Fratures (setup) The values of the Boot, Up, Floppy, Swap, Floppy, Drive, and will be set as: Disabled, seek 3, memory problems, or CPU frequency is changed, replace memory, restore BIOS default value can be. Wipe the gold fingers with an eraser 3, originally hung two hard disk, in the BIOS set into a double hard disk, and then remove one of them, but forget to change the BIOS settings, there will be this problem. Just restore the BIOS default value. Set the hard disk as first boot. Restart, press Del into BIOS, find the Advanced Bios Features (advanced BIOS parameter settings), press enter to enter the Advanced Bios Features interface, the First Boot Device set to HDD-O (hard disk start). Save and exit. 4, if the above settings can not, then the COMS battery is dead, open the host, pull down the button type COMS battery, to buy a computer market, change it Method for restoring BIOS default value: Turn on or restart the computer. Press DEL to enter BIOS. Find the Load Fail-Safe Defaults, press the arrow keys to enter after the elections, that determine whether, according to Y, the final choice of Save&exit step enter. (save settings), you can directly press the F10. According to Y hit enter.automatically restart.is set up to solve the problem. 5, restore or optimize the BIOS settings. Turn on your computer or restart your computer, Press the "Del" button to enter the settings interface of BIOS: Award LOAD BIOS DEFAULTS (load the BIOS default), which is used to load the initial settings of the BIOS to determine the scope of the fault. LOAD OPRIMUM SETTINGS (load motherboard BIOS factory settings), this is the factory BIOS optimized settings. Or AML LOAD, BIOS, SETUP, DEFAULTS (load the BIOS setting defaults), this option is used to load the BIOS initial settings. LOAD HIGH PERFORMANCE DEFAULTS (high performance default value), which is used to load the BIOS optimization settings. When you select the default or optimized value with the keyboard arrow key, press the ESC key, the F10 key, the Y key, enter, save, and exit