为了正常的体验网站,请在浏览器设置里面开启Javascript功能!

protel元件封装库总结

2017-10-16 21页 doc 49KB 16阅读

用户头像

is_833902

暂无简介

举报
protel元件封装库总结protel元件封装库总结 Protel component library summary Summary of Protel component library PROTEL99SE Resistance AXIAL Non-polar capacitor RAD Electrolytic capacitor RB- Potentiometer VR Diode DIODE Triode TO Power supply block 78 and 79 series TO126H and TO-126V ...
protel元件封装库总结
protel元件封装库总结 Protel component library summary Summary of Protel component library PROTEL99SE Resistance AXIAL Non-polar capacitor RAD Electrolytic capacitor RB- Potentiometer VR Diode DIODE Triode TO Power supply block 78 and 79 series TO126H and TO-126V The FET is the same as the triode D44 D37 D46 rectifier bridge Single row multi pin socket, CON, SIP Dual in line element DIP Crystal oscillator XTAL1 Resistors: RES1, RES2, RES3, RES4; the package attribute is axial series Non-polar capacitor: cap; the package property is RAD-0.1 to rad-0.4 Electrolytic capacitor: electroi; the package property is rb.2/.4 to rb.5/1.0 Potentiometer: Pot1, pot2; encapsulation property is VR-1 to vr-5 Diode: the package property is diode-0.4 (small power) diode-0.7 (high power) Triode: common packaging attributes for TO-18 (ordinary triode), to-22 (high-power transistor) TO-3 (high-power Darin) Catheter The power regulator blocks have 78 and 79 series; the 78 series, such as 780578127820, etc. The 79 series has 790579127920 Common encapsulation attributes are to126h and to126v 1. resistor Fixed resistance: RES Semiconductor resistance: RESSEMT Potentiometer; POT Variable resistance; RVAR Adjustable resistor; res1 2. capacitor Fixed value non-polar capacitor; CAP Fixed value has polarity capacitor; CAP Semiconductor capacitor: CAPSEMI Adjustable capacitor: CAPVAR 3. inductance: INDUCTOR 4. diode: DIODE.LIB Light emitting diode: LED 5. transistor: NPN1 6. junction type field effect tube: JFET.lib 7.MOS field effect transistor 8.MES field effect transistor 9. relay: PELAY. LIB 10. bulb: LAMP 11. op amp: OPAMP 12. digital tube: DPY_7-SEG_DP (MISCELLANEOUS DEVICES.LIB) 13. switch; sw_pb Common library file: Miscellaneous Devices.ddb Dallas Microprocessor.ddb Intel Databooks.ddb Protel DOS Schematic Libraries.ddb PCB components library: Advpcb.ddb General IC.ddb Miscellaneous.ddb Some discrete components library, component names, and Chinese and English controls AND and gate ANTENNA antenna BATTERY DC power supply BELL bell, bell BVC coaxial cable connector BRIDEG 1 rectifier bridge (diode) BRIDEG 2 rectifier bridge (integrated block) BUFFER buffer BUZZER buzzer CAP capacitor CAPACITOR capacitor The CAPACITOR POL has a polarity capacitor CAPVAR adjustable capacitor CIRCUIT BREAKER fuse wire COAX coaxial cable CON socket CRYSTAL crystal tuning device DB parallel socket DIODE diode DIODE SCHOTTKY zener diode diode varactor 变容二极管 dpy _ 3 seg 3段led dpy _ 7 seg 7段led dpy _ 7 seg _ dp 7段led (带小数点) electro 电解电容 fuse 熔断器 inductor 电感 inductor iron 带铁芯电感 inductor3 可调电感 jfet n n沟道场效应管 jfet p p沟道场效应管 lamp 灯泡 lamp nedn 起辉器 part 发光二极管 meters 仪表 microphone 麦克风 mosfet mos管 motor, ac 交流电机 motor servo 伺服电机 nand 与非门 nor 或非门 not 非门 npn npn三极管 npn - photo 感光三极管 opamp 运放 or 或门 photo 感光二极管 paperboard 三极管 npn dar npn三极管 paperboard dar pnp三极管 pot 滑线变阻器 pelay - dpdt 双刀双掷继电器 res1.2 电阻 res3.4 可变电阻 resistor bridge? 桥式电阻 respack? 电阻 scr 晶闸管 the plug? 插头 plug ac female 三相交流插头 socket? 插座 source current 电流源 source voltage 电压源 speaker 扬声器 sw? 开关 sw dpdy? 双刀双掷开关 sw spst? 单刀单掷开关 sw - pb 按钮 thermistor 电热调节器 trans1 变压器 trans2 可调变压器 triac? 三端双向可控硅 triode? 三极真空管 varistor 变阻器 . - drawings, sealed envelopes? 齐纳二极管 dpy _ 7 seg _ dp 数码管 sw - pb 开关 其他元件库 protel dos schematic 4000 cmos. lib (40.系列cmos管集成块元 件库) d 触发器 4013 4027 jk 触发器 protel dos schematic analogue digital.lib (模拟数字式集成块元件库) ad系列 dac系列 hd系列 mc系列 protel dos schematic comparator.lib (比较放大器元件库) protel dos shcematic intel.lib (intel公司生产的80系列cpu集成块元件库) protel dos schematic linear.lib (线性元件库) 例555 protel dos schemattic memory devices.lib (内存存储器元件库) protel dos schematic synertek.lib (sy系列集成块元件库) objection dos schematic motorlla.lib (摩托罗拉公司生产的元件库) objection dos schematic nec.lib (nec公司生产的集成块元件库) objection dos schematic operational amplifers.lib (运算放大器元件库) objection dos schematic ttl.lib (晶体管集成块元件库 74系列) Protel DOS图库(电压调整集成块元件库)电压调节器。 那时,DOS示意Zilog .lib(齐格格公司生产的系列Z80 CPU集成块元件库) 元件属性对话框中英文对照 LIB参考元件名称 足迹器件封装 元件称号指示器 部分器件类别或标示值 工具主工具栏示意图 书写工具连线工具栏 绘图工具绘图工具栏 稳压二极管齐纳二极管 肖特基二极管肖特基二极管 二极管二极管 变容二极管变容二极管 三极管晶体管 电感电感 磁环 1。电阻 固定电阻:RES 半导体电阻:ressemt 电位计;锅 变电阻;讨论 可调电阻;RES1 2。电容 定值无极性电容;帽 定值有极性电容;帽 半导体电容:capsemi 可调电容:capvar 3电感:电感。 4二极管:DIODE.LIB。 发光二极管:LED 5。三极管:npn1 6。结型场效应管:结型场效应管 7。MOS场效应管 8。MES场效应管 9继电器:PELAY。lib 10灯泡:灯。 11运放:运放。 12。数码管:dpy_7-seg_dp(杂项设备。库) 13。开关;sw_pb 原理图常用库文件: 杂devices.ddb 达拉斯microprocessor.ddb 英特尔databooks.ddb Protel原理图libraries.ddb DOS PCB元件常用库: advpcb.ddb IC.ddb将军 miscellaneous.ddb 部分分立元件库元件名称及中英对照 和与门 天线天线 电池直流电源 贝尔铃,钟 BVC同轴电缆接插件 位于1整流桥(二极管) 位于2整流桥(集成块) 缓冲缓冲器 蜂鸣器蜂鸣器 第电容 电容器电容 电容器的极化有极性电容 capvar可调电容 断路器熔断丝 哄同轴电缆 CON插口 水晶晶体整荡器 DB并行插口 二极管二极管 稳压二极管肖特基二极管 变容二极管变容二极管 3段dpy_3-seg LED 7段dpy_7-seg LED 7段dpy_7-seg_dp LED(带小数点) 电电解电容 熔断器熔断器 电感电感 铁带铁芯电感电感 可调电感可调电感 JFET N沟道场效应管 JFET P沟道场效应管 灯灯泡 灯NEdN起辉器 LED发光二极管 表仪表 麦克风麦克风 MOSFET的MOS管 电机交流交流电机 电机伺服伺服电机 NAND与非门 也不或非门 不非门 NPN型三极管 npn-photo感光三极管 运放运放 或或门 照片感光二极管 PNP三极管 NPN DAR NPN三极管 PNP PNP三极管DAR 锅滑线变阻器 pelay-dpdt双刀双掷继电器 res1.2电阻 res3.4可变电阻 电阻桥吗,桥式电阻 respack,电阻 SCR晶闸管 插头,插头 交流插头三相交流插头 插座,插座 电流源电流源 电源电压电压源 扬声器扬声器 SW,开关 sw-dpdy,双刀双掷开关 sw-spst,单刀单掷开关 sw-pb按钮 热敏电阻电热调节器 trans1变压器 反可调变压器 双向可控硅,三端双向可控硅 三极管,三极真空管 压敏电阻变阻器 ZENER,齐纳二极管 dpy_7-seg_dp数码管 sw-pb开关 其他元件库 Protel DOS示意图4000 CMOS库(40。系列CMOS管集成块元件库) 4013触发器 4027 JK触发器 Protel DOS原理模拟数字库(模拟数字式集成块元件库)。 广告系列DAC系列高清系列MC系列 Protel DOS原理比较器。库(比较放大器元件库) Protel DOS shcematic英特尔。库(英特尔公司生产的80系列CPU集成块元件库) Protel DOS原理线性自由(线性元件库)。 例555 Protel DOS schemattic LIB(内存存储器元件库)存储设备。 Protel DOS示意该.lib(SY系列集成块元件库) 那时,DOS示意motorlla LIB(摩托罗拉公司生产的元件库)。 那时,DOS示意NEC .lib(NEC公司生产的集成块元件库) 那时,DOS示意operationel放大器。库(运算放大器元件库) 那时,DOS示意TTL .lib(晶体管集成块元件库74系列) Protel DOS图库(电压调整集成块元件库)电压调节器。 那时,DOS示意Zilog .lib(齐格格公司生产的系列Z80 CPU集成块元件库) 元件属性对话框中英文对照 LIB参考元件名称 足迹器件封装 元件称号指示器 部分器件类别或标示值 工具主工具栏示意图 书写工具连线工具栏 绘图工具绘图工具栏 稳压二极管齐纳二极管 肖特基二极管肖特基二极管 二极管二极管 变容二极管变容二极管 三极管晶体管 电感电感 磁环emifil 电阻电阻 电容能力 晶振晶体 涤纶电容麦拉帽 电解电容选帽 瓷片电容陶瓷帽 安规电容膜盖 emifil 电阻电阻 电容能力 晶振晶体 涤纶电容麦拉帽 电解电容选帽 瓷片电容陶瓷帽 安规电容膜盖 整流桥:Bridge1,2:封装属性为D系列(d-44,d-37,d-46) 电阻:axial0.3-axial0.7其中0.4-0.7指电阻的长度,一般用axial0.4 瓷片电容:rad0.1-rad0.3。其中0.1-0.3指电容大小,一般用rad0.1 电解电容:RB。1。2-rb。4。8其中。1。2。4。8指电容大小。一般< 100uf用 RB。1。2100uf-470uf用RB。2 / 4,> 470uf用RB。3 / 6。 二极管:diode0.4-diode0.7其中0.4-0.7指二极管长短,一般用diode0.4 发光二极管:RB。1 / 2。 集成块:dip8-dip40,其中8,40指有多少脚,8脚的就是DIP8 贴片电阻 0603表示的是封装尺寸与具体阻值没有关系 但封装尺寸与功率有关通常来说 1 / 0201 20w 1 / 0402 16w 0603 1 / 10W 0805、1、8周 1206 1、4 电容电阻外形尺寸与封装的对应关系是: 0402 = 1.0x0.5 0603 = 1.6x0.8 0805 = 2.0x1.2 1206 = 3.2x1.6 1210 = 3.2x2.5 1812 = 4.5x3.2 2225 = 5.6x6.5 关于零件封装我们在前面说过,除了lib库中的元件外,其它库的元件都已经有了装置。 固定的元件封装,这是因为这个库中的元件都有多种形式:以晶体管为例说明一下: 晶体管是我们常用的的元件之一,在装置。库库中,简简单单的只有NPN与PNP之分,但 实际上2N3055 NPN,如果它是的那它有可能是铁壳子的3,如果它是NPN的2N3054,则有 可能是铁壳的to-66或TO-5,而学用的cs9013,有to-92a,to-92b,还有TO-5,TO,到5 2等等,千变万化。 还有一个就是电阻,在装置库中,它也是简单地把它们称为RES1和RES2,不管它是100 还是470kΩ都一样,对电路板而言,它与欧姆数根本不相关,完全是按该电阻的功率数来 定的我们选用的1、4和甚至1、2的电阻,都可以用axial0.3元件封装, And the power is a little bigger Available with AXIAL0.4, AXIAL0.5, etc.. Now the commonly used components are packaged as follows: Resistors and non-polar dual terminal elements AXIAL0.3-AXIAL1.0 Non-polar capacitor RAD0.1-RAD0.4 Polarity capacitor RB.2/.4-RB.5/1.0 Diode DIODE0.4 and DIODE0.7 Quartz crystal oscillator XTAL1 Transistors, FET, UJT, TO-xxx (TO-3, TO-5) Variable resistance (POT1, POT2) VR1-VR5 Of course, we can also open the C:\Client98\PCB98\library\advpcb.lib library to find the corresponding seal for the parts used Install. These commonly used components package, we had better take it back, these components package, we can split it into two parts To remember, such as resistance, AXIAL0.3 can be divided into AXIAL and 0.3, AXIAL translate into Chinese is axial, and the 0.3 is the resistance in India The distance between the pads on the circuit board is 300mil (because in the field of the motor, it is mainly in English units. same For non-polar capacitors, the same is true for RAD0.1-RAD0.4; for polar capacitors, such as electrolytic capacitors, the package is R B.2/.4, RB.3/.6, etc., wherein ".2" is the pad spacing, and ".4" is the outer diameter of the capacitor cylinder. For transistors, look directly at its shape and power. Transistors with high power use TO - 3, medium power transistors If it is flat, use TO-220, if it is metal shell, use TO-66, small power transistor, use TO-5 Yes, TO-46, TO-92A and so on. Anyway, it has long pins and bends. For commonly used integrated IC circuits, there is the DIPxx, which is dual in line package, and the DIP8 is double, with 4 leads per row The distance between the two rows is 300mil, and the distance between the pads is 100mil. SIPxx is a single row package. Wait。 What is worth our attention is the transistor with variable resistance, and their packaging is the most headache, the same packaging, its pin Not necessarily the same. For example, for packages such as TO-92B, usually 1 feet are E (emitter), and the 2 foot may be The B pole (base) may also be the C (collector); similarly, the 3 foot may be C, or it may be B, specifically that one Only the component can be determined. Therefore, the circuit software does not dare to define the pad name (pin name) exactly the same Field effect transistors, MOS transistors can also be packaged like transistors, which can be common to components of three pins. Q1-B, in PCB, when you load this network table, you won't find a node (not at all). Similar problems can also occur on variable resistors; in the schematic diagram, pins with variable resistance are 1, W, and 2 respectively, The resulting network tables are 1, 2, and W. In the PCB circuit board, pads are 1, 2, 3. When the circuit has these two kinds of yuan When you want to change the difference between PCB and SCH, the fastest way is to produce the network table directly in the network table Body tube feet are replaced by 1, 2, and 3; Change the variable resistance to 1, 2, 3 of the shape of the circuit board components. Component packaging is the component in the circuit board is the existence of the situation, Footprint that column is the component package column, to enter their own, such as resistance can be used AXIAL0.3, and so on Electrical, graphic, symbolic, and encapsulated forms of Protel99 common components 1. standard resistance: RES1, RES2; package: AXIAL-0.3 to AXIAL-1.0 Two port variable resistance: RES3, RES4; package: AXIAL-0.3 to AXIAL-1.0 Three port variable resistance: RESISTOR, TAPPED, POT1, POT2; package: VR1-VR5 2. capacitors: CAP (non-polar capacitor), ELECTRO1 or ELECTRO2 (polar capacitor), variable capacitor CAPVAR Package: non polarity capacitor from RAD-0.1 to RAD-0.4, with polarity capacitance of RB.2/.4 to RB.5/1.0. 3. diode: DIODE (common diode), DIODE SCHOTTKY (Schottky diode), DUIDE TUNNEL (tunnel diode), DIODE VARCTOR (varactor diode), ZENER1~3 (zener diode) Package: DIODE0.4 and DIODE 0.7; (as mentioned above, remember to make PCB, don't forget to encapsulate the port of DIODE instead of A, K) 4. transistor: NPN, NPN1 and PNP, PNP1; pin package: TO18, TO92A (ordinary triode), TO220H (high-power transistor), TO3 (high-power Darlington tube) The above package is triangular. T0-226 is a straight line, and we usually use 9013 and 9014 pins in line type, so we use TO-126 in general transistors! 5, effect tube: JFETN (N channel junction type FET), JFETP (P channel junction type FET), MOSFETN (N channel enhancement mode), MOSFETP (P channel enhancement tube) The pin package is the same as the triode. 6, inductance: INDUCTOR, INDUCTOR1, INDUCTOR2 (ordinary inductance), INDUCTOR, VAR, INDUCTOR3, INDUCTOR4 (variable inductance) 8. rectifier bridge schematic commonly used in the name of BRIDGE1 and BRIDGE2, pin packaging for the D series, such as D-44, D-37, D-46 and so on. 9. single row multi pin socket schematic diagram commonly used in the name of CON series, from CON1 to CON60, pin packaging form for SIP series, from SIP-2 to SIP-20. 10. dual in line component schematic commonly used in accordance with the name of the different functions, pin package DIP series, Not as good as 40 pin single-chip microcomputer package for DIP40. 11. series parallel port class diagram, commonly used in the name of DB series, pin packaging forms for the DB and MD series. 12 、 crystal oscillator: CRYSTAL; package: XTAL1 13, led: LED; packaging can only use the capacitor packaging. (RAD0.1-0.4) 14, light-emitting digital tube: DPY; as for the package, it is recommended to do it yourself! 15, toggle switch: SW DIP; packaging, you need to measure their own foot distance to do! 16, button switch: SW-PB: package ibid., but also need to do it yourself. 17, transformer: TRANS1 - TRANS5; package needless to say? Measure it yourself, then add two screws to it. Finally, talk about the principle Library of PROTEL 99! 常用元器件都在Protel原理图图书馆DDB里DOS。 此外还有Protel DOS示意图4000 CMOS(4000序列元件) Protel DOS原理模拟数字(A/D、D/A转换元件) Protel原理图(比较器,如DOS比较器LM139之类) Protel DOS示意英特尔(英特尔的处理器和接口芯片之类)
/
本文档为【protel元件封装库总结】,请使用软件OFFICE或WPS软件打开。作品中的文字与图均可以修改和编辑, 图片更改请在作品中右键图片并更换,文字修改请直接点击文字进行修改,也可以新增和删除文档中的内容。
[版权声明] 本站所有资料为用户分享产生,若发现您的权利被侵害,请联系客服邮件isharekefu@iask.cn,我们尽快处理。 本作品所展示的图片、画像、字体、音乐的版权可能需版权方额外授权,请谨慎使用。 网站提供的党政主题相关内容(国旗、国徽、党徽..)目的在于配合国家政策宣传,仅限个人学习分享使用,禁止用于任何广告和商用目的。
热门搜索

历史搜索

    清空历史搜索