dos常用命令---路由跟踪命令.查看DNS、IP、Mac等

dos常用命令---路由跟踪命令.查看DNS、IP、Mac等 dos常用命令---路由跟踪命令.查看DNS、IP、Mac等 DOS common command - route tracking command. See DNS, IP, Mac, etc Most basic, most commonly used, test the physical network Ping 192.168.8-t, the parameter -t is waiting for the user to interrupt the test Look at DNS, IP, Mac, etc Aleem walji in98: winipcfg B.W in2000 above: Ipconfig/all C.N SLOOKUP: if you look at the DNS in hebei C: \ > nslookup Default Server: ns.hesjptt.net.cn Address: 202.99.160.68 > server 202.99.41.2 changed the DNS to 41.2 > pop.pcpop.com Server: ns.hesjptt.net.cn Address: 202.99.160.68 The Non - authoritative answer: Name: pop.pcpop.com Address: 202.99.160.212 Online messenger (often asked) Net send computer name/IP | * (broadcast). Note that you cannot cross the network segment The net stop messenger stops the messenger service, or it can be modified in the panel - service Net start messenger starts messenger service Probe each other's computer name, group, domain, and current user name (how the hunt works) Ping - a ip-t, which only shows the NetBios name Nbtstat - a 192.168.10.146 is complete 5.net stat - a shows all the ports that your computer is currently open Netstat -s-e is a more detailed display of your network data, including data from TCP, UDP, ICMP, and IP Probe the arp binding (dynamic and static) list, showing all the computers connected to my computer, displaying the other's IP and MAC addresses Arp -a On the proxy server side Bundle IP and MAC addresses, resolve LAN theft IP! : Arp-s 192.168.10.5900-50-ff-6c-08-75 Remove the IP of the network card from the MAC address binding: Arp 3-d network card IP Hide your computer from your online neighbors (let people see you!) .net config server/hidden: yes Net config server/hidden: no is open 9. A few.net command A. displays the current working group server list net view, which displays A list of computers on the current domain or network when using this command without the option. For example, check out the Shared resources on this IP C: \ > net view 192.168.10.8 Share resources in 192.168.10.8 Resource sharing name type usage annotations -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Site service Disk The order was successfully completed. Check the user account list net user on the computer C. view network link net use For example, net use z: \ \ 192.168.10.8 \ movie maps this IP's movie Shared directory to a local z disk D. record the link net session Such as: C: \ > net session Computer user name customer type opens idle time -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- \ \ 192.168.10.110 ROME Windows 2000 2195 0 00:03:12 \ \ 192.168.10.51 ROME Windows 2000 2195 0 00:39 The order was successfully completed. Route tracking commands A.t racert pop.pcpop.com B.p athping pop.pcpop.com also provides an analysis of 325S to calculate the % of the lost package 11. Several commands for sharing security A. check out the Shared resources of your machine Manually delete the share (you can make up a bat file, boot up and delete the share!) Net share c $/ d Net share $d/d Net share the ipc $/ d Net share the admin $/ d Notice the space after $$. Add a share: C: \ net share mymovie = e: \ downloads \ movie/users: 1 Mymovie shares success. Limit the number of links to 1. Set static IP at the DOS line A. set the static IP CMD netsh Netsh > int Interface > IP Interface IP > set add "local link" static IP address mask gateway B. check the IP Settings Interface IP > show the address Arp Display and modify items in the "address resolution protocol (ARP)" cache. The ARP cache contains one or more tables that store the IP address and its parsed Ethernet or token ring physical address. Each Ethernet or token ring network adapter installed on the computer has its own table. If used without parameters, the arp command displays the help information. grammar Arp [-a] [-n IfaceAddr] [-d] [-d] [-d] [-d]. parameter [-n IfaceAddr] Displays the current ARP cache table for all interfaces. To display the ARP cache entry that specifies the IP address, use the arp-a with the inetdr parameter, which represents the IP address specified by the InetAddr. To display the ARP cache table for the specified interface, use the -n IfaceAddr parameter, where the IfaceAddr delegate is assigned to the IP address assigned to the specified interface. -n parameters are case sensitive. -g [InetAddr] [-n IfaceAddr] It's the same thing as negative a. - d InetAddr [IfaceAddr] Delete the specified IP address item, where the InetAddr represents the IP address. For the specified interface, to delete one item in the table, use the IfaceAddr Parameter, the IfaceAddr delegate here is assigned to the IP address of the interface. To remove all items, use the asterisk (*) wildcard instead of InetAddr. -s InetAddr, EtherAddr [IfaceAddr] Adding a static item to the ARP cache to parse the IP address InetAddr into the physical address EtherAddr. To add a static ARP cache entry to the table of the specified interface, use the IfaceAddr parameter, where the IfaceAddr represents the IP address assigned to the interface. /? Displays help at the command prompt. annotation The IP address of InetAddr and IfaceAddr is represented by decimal notation with dots. The physical address EtherAddr consists of six bytes, which are represented in hexadecimal notation and separated by hyphens (for example, 00 - AA -00-00-4f-2a-9c). The items added by the -s parameter are static items that do not timeout in the ARP cache. If the TCP/IP protocol is terminated, the items will be deleted. To create a permanent static ARP cache entry, please use proper ARP in the batch file command and through the "planning task program" on startup the batch file. This command is only available when the Internet protocol (TCP/IP) protocol is installed as a component of the network adapter property in a network connection. sample To display the ARP cache table for all interfaces, type: Arp -a For an interface assigned with an IP address of 10.0.0.99, display its ARP cache table, which can be typed: Arp-a-n 10.0.99 To add a static ARP cache entry that parses the IP address 10.0.0.80 to the physical address, 00 - AA -, 1-4f-2a-9c, type: Arp-s 10.0.80 - AA - 00-4f-2a-9c Tag: DOS common command - route tracing to view DNS Mac Related articles: A common instruction for the network In 2010, the latest hunan telecom, tiantong, netcom, TV, radio and television. Cisco routing configuration commands, cisco firewall commands.. How to modify the MAC address of the desktop Huawei certification: huawei's new command line resolution How do I learn how to implement server DNS centralized parsing Don't underestimate the PING command by using numeric strings instead of IP. How do you correctly use the Windows Ping command Internet cafe routers are either soft or hard Network game port view method