《马悦凌细说问诊单》 问舌苔白、黄、厚腻、发黑、无舌苔,舌苔主要

《马悦凌细说问诊单》 问舌苔白、黄、厚腻、发黑、无舌苔,舌苔主要 《马悦凌细说问诊单》 问舌苔白、黄、厚腻、发黑、无舌苔，舌苔主要集中在舌中间、舌根 部,[马悦凌健康养生网BBS] 左栏 右栏 欢迎您:游客～请先 登录 或 注册 风格 恢复默认设置 | 展区 文件集浏览 图片集浏览 Flash浏览 音乐集浏览 电影集浏览 | 搜索 | 网站首页 马悦凌健康养生网BBS ? 与马悦凌面对面 ? 马悦凌文选 ? 《马悦凌细说问诊单》 问舌 苔白、黄、厚腻、发黑、无舌苔，舌苔主要集中在舌中间、舌根部, 新的主题 投票帖 交易帖 小字报 下一主题 >> << 上一主题 总数 58 1 2 3 4 5 6 下一页 共有16833人关注过本帖树形打印主题:《马悦凌细说问诊单》 问舌苔白、黄、厚 腻、发黑、无舌苔，舌苔主要集中在舌中间、舌根部, 马悦凌小大 1楼 个性首页 | 信息 | 搜索 | 主页 | UC 加好友 发短信 身份:水房 appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. Depth of undercut should be less than or equal to 0.5 mm, total length of the welds on both sides undercut not exceed 10% of the weld length, and long continuous should not be greater than 100 mm. Wrong side should be less than or at 0.2T, and should not be greater than 2 mm (wall thickness mm t) incomplete or not allow 7.5 7.5.1 installation quality process standards of the electrical enclosure Cabinet surface is clean, neat, no significant phenomenon of convex, close to nature, close the door. 7.5.2 Cabinet Cabinet face paints no paint, returned to rusted, consistent color. 7.5.3 uniform indirect gap from top to bottom, slot width <1.5mm 7.5.4 adjacent Cabinet surface roughness is 0. 7.5.5 the cabinets firmly fixed, crafts beautiful. 7.5.6 Cabinet surface gauge, switch cabinet mark clear, neat, firm paste. 7.5.7 Terminal row of neat, is reliable, the appearance is clean and not damaged. 7.5.8 cables neat and clean, solid binding, binding process in appearance. 7.5.9 the first cable production firm, crafts beautiful, clear signage does not fade. 7.5.10 fireproof plugging tight, no cracks and pores. 7.6 7.6.1 of the standard electrical wiring quality technology cable a, the multi-core wire bunch arrangement should be parallel to each other, horizontal wire harness or wire should be perpendicular to the longitudinal multi-core wire bunch. The distance between the wire harness and wire harness symmetry, and as close as possible. B-core wiring harness into round, multi-core wire bunch used g wire binding, fastening 参与:507 人气:0 热帖:19 注册:2008-8-22 14:30:00 问舌苔白、黄、厚腻、发黑、无舌苔，舌苔主要集中在舌中 《马悦凌细说问诊单》 间、舌根部, Post By:2009-5-11 0:49:00 ִ ύ� Web www.mayueling.com 马悦凌养生交流会 我的美容与刮痧[心情客栈]分享母女齐上阵，来扎四缝针[产后指南]女人坐月子究竟该由谁来照顾[婚后空间]他这样对我，我该不该离开他[时尚扮靓]来分享素面朝天也需循序渐进[心情客栈]酸性体质的我制的奇妙黑米粥[婚后空间]老公口袋没钱让我更有安全感[感冒]分享我个人对付感冒的简单方法 《马悦凌细说问诊单》 问舌苔白、黄、厚腻、发黑、无舌苔，舌苔主要集中在舌中间、舌根部, 正常的舌苔是薄白而干净的，舌苔在舌质上的分布是均匀的，而且润泽，干湿适中，不厚不腻，不滑不燥。 舌苔白:舌苔白说明是体内有寒，无论是吃了寒冷的食物还是身体受了寒，舌苔都会发白。现在的人们多数都是白苔，这主要是吃寒凉的食物过多或贪吃冰镇的食物造成的。只有少吃寒凉的食物，避免受凉，才能减少寒凉对身体内部的影响，身体内的寒少了，舌苔就不会明显发白了。 舌苔白而且非常湿润，看上去反光增强了，说明身体内不但寒重而且湿重，这种人容易发生水肿，而且痰多。 当舌苔白而过分湿润时，一定要停掉所有的水果，停掉寒凉的食物，千万不要再喝冰镇的饮料，去掉寒邪、湿邪，多吃温性的食物，身体内的寒湿减少后，水肿情况就会缓解、消退，痰也会明显减少。 也有人舌苔白，但却干燥，这种情况说明这个人不但体内有寒而且身体内燥热、血少，遇到这种情况的人，一是要找出身体受寒的原因，尽快去除病因，二是不能吃辛辣、温性的食物，比如吃生姜祛寒在这里就不合适了，因为吃这些东西会增加燥热。那么，这些人该怎么驱除寒湿呢,只要不再吃寒凉的食物，身体不再受凉，同时多吃性平的、易消化的各种食物，慢慢地补足血液，让血液去润燥，这样坚持下去，舌苔不会继续发白，舌质也会因血液的滋养而润泽。当舌质不干燥时再用全身熏艾条的方法祛寒、疏通经络，燥火自然会慢慢随之消退。 appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. Depth of undercut should be less than or equal to 0.5 mm, total length of the welds on both sides undercut not exceed 10% of the weld length, and long continuous should not be greater than 100 mm. Wrong side should be less than or at 0.2T, and should not be greater than 2 mm (wall thickness mm t) incomplete or not allow 7.5 7.5.1 installation quality process standards of the electrical enclosure Cabinet surface is clean, neat, no significant phenomenon of convex, close to nature, close the door. 7.5.2 Cabinet Cabinet face paints no paint, returned to rusted, consistent color. 7.5.3 uniform indirect gap from top to bottom, slot width <1.5mm 7.5.4 adjacent Cabinet surface roughness is 0. 7.5.5 the cabinets firmly fixed, crafts beautiful. 7.5.6 Cabinet surface gauge, switch cabinet mark clear, neat, firm paste. 7.5.7 Terminal row of neat, is reliable, the appearance is clean and not damaged. 7.5.8 cables neat and clean, solid binding, binding process in appearance. 7.5.9 the first cable production firm, crafts beautiful, clear signage does not fade. 7.5.10 fireproof plugging tight, no cracks and pores. 7.6 7.6.1 of the standard electrical wiring quality technology cable a, the multi-core wire bunch arrangement should be parallel to each other, horizontal wire harness or wire should be perpendicular to the longitudinal multi-core wire bunch. The distance between the wire harness and wire harness symmetry, and as close as possible. B-core wiring harness into round, multi-core wire bunch used g wire binding, fastening 舌苔黄:舌苔黄代着体内有热，这种热有实热和虚热之分。如果舌苔黄而舌质发红，说明体内有热，说明这段时间吃了过多的温性的、能量高的食物，食物不能完全被消化吸收，才会引起黄苔。这时只要少吃高能量的食物，吃些萝卜、山楂消食化瘀，吃的食物清淡一些，多喝水，多运动，黄苔也能很快消退。 如果舌苔黄而舌质的颜色正常，或偏白，说明体内的消化功能弱，体内有寒，对吃进的高能量的食物不能运化、吸收，这种情况下，可以吃一些辛辣的食物帮助运化，如吃上一顿热辣辣的火锅后，黄苔、厚腻苔就会明显消退了。 舌苔厚腻:有舌苔白的厚腻，有舌苔黄的厚腻。厚腻代表的是胃肠消化吸收的能力差，也就是胃肠动力差，运化不了食物。 针对舌苔白的厚腻，可以多吃辛辣、温性的食物，这类食物能增加温度，帮助脾胃的运化;舌苔黄的厚腻可以参考上面关于舌苔黄的那个部分中介绍的方法，根据舌质的情况去处理就可以了。 舌苔发黑:大家都知道，食物在放坏之前，颜色会发生一些变化，就如一个苹果放久了，局部的颜色慢慢开始发黄、发暗、最后变黑，食物因变质而发黑，代表的是变坏的程度已经很重。舌苔发黑了说明什么呢,说明身体内的脏器功能低下，污浊、腐败之气已很重了。舌苔出现这种颜色的人，大多数胃肠功能差，不能消化、吸收的食物又不能随时排出体外，堆积在肠道里，腐败变质后的毒素发散到身体内部，也表现在舌头的颜色上。有不少患恶性肿瘤的病人，到了晚期，舌苔有不少是黑的，这意味着，到了癌症晚期，脏器已接近腐败坏死，污浊之气浓重，舌头上的颜色清楚地记录着病人疾病的程度。舌头上的黑色，其实也是在提醒病人，你的健康状况已经非常非常危险了。 所以黑苔是一种很不好的现象，它提醒我们，要注意观察舌苔的颜色，当舌苔刚出现一些变黄、发暗的迹象时就要及时进行处理，如果胃肠道的疾病明显，就要及时治疗胃肠道的各种疾病。我在《温度决定生老病死》这本书中，介绍了胃部不适、腹泻、便秘的治疗方法。如经常出现口臭的人，是胃气虚弱、胃寒重是表现，可以经常口含生姜片，就能明显的减轻或消灭口臭。各种胃肠疾病，如慢性胃炎、胃溃疡、肠炎、经常胃胀、腹胀、腹泻的人，可以每天早上空腹的时候用三片生姜煮水，用滚开的生姜水冲鸡蛋，经常空腹的时候喝下暖洋洋的、易于消化的鸡蛋茸，能暖胃肠、去胃肠寒，并能营养胃肠道的粘膜，能慢慢的缓解胃肠不适的症状等等。当胃肠道的功能渐渐恢复后，舌苔是会明显的发生变化的。 各种癌症晚期、生命垂危的病人，只能慢慢地对身体进行全方位的细心调理，越是重危病人，就像将要熄灭的炉火。用过炉子的人知道，对将要熄灭的炉火，是不能大动干戈翻动炉火的，一翻动很可能就会熄灭，也不能洒上水，即使很少量的水也可能会熄灭这微弱的火苗。这个时候该怎么办呢,只能用干草，或者将木柴粉碎成木屑、刨成刨花，将煤appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. Depth of undercut should be less than or equal to 0.5 mm, total length of the welds on both sides undercut not exceed 10% of the weld length, and long continuous should not be greater than 100 mm. Wrong side should be less than or at 0.2T, and should not be greater than 2 mm (wall thickness mm t) incomplete or not allow 7.5 7.5.1 installation quality process standards of the electrical enclosure Cabinet surface is clean, neat, no significant phenomenon of convex, close to nature, close the door. 7.5.2 Cabinet Cabinet face paints no paint, returned to rusted, consistent color. 7.5.3 uniform indirect gap from top to bottom, slot width <1.5mm 7.5.4 adjacent Cabinet surface roughness is 0. 7.5.5 the cabinets firmly fixed, crafts beautiful. 7.5.6 Cabinet surface gauge, switch cabinet mark clear, neat, firm paste. 7.5.7 Terminal row of neat, is reliable, the appearance is clean and not damaged. 7.5.8 cables neat and clean, solid binding, binding process in appearance. 7.5.9 the first cable production firm, crafts beautiful, clear signage does not fade. 7.5.10 fireproof plugging tight, no cracks and pores. 7.6 7.6.1 of the standard electrical wiring quality technology cable a, the multi-core wire bunch arrangement should be parallel to each other, horizontal wire harness or wire should be perpendicular to the longitudinal multi-core wire bunch. The distance between the wire harness and wire harness symmetry, and as close as possible. B-core wiring harness into round, multi-core wire bunch used g wire binding, fastening 块敲打成煤粉，一点点地洒到炉火上，少量多次的慢慢洒这些极易燃烧的燃料，这时的炉火才会慢慢燃烧的有力量，等炉火燃烧得旺一些时，这时再去轻轻地捅捅炉膛火，不仅不会使炉火熄灭，反而更加利于燃料的燃烧，这时再加上一些木柴、煤块，炉子就能熊熊燃烧起来，炉火就救治成功了。 同样道理，对待危垂病人、癌症晚期病人，就要像对待即将熄灭的炉火一样小心谨慎。在我们人身上，救炉火与救治重病人是一个道理，在病人身体极度虚弱时，很多正常人适用的保健方法是不能用的，比如不能运动、不能活血、尽量少做按摩，而只能安静地让病人静养;不能“洒水”，就是不能再吃各种寒湿重的食物包括瓜果，不能再从身体内部降温了，然后再将各种有营养的食物粉碎了给病人进食，在吃法上也有讲究，要半碗、半碗的分多次慢慢地喂给病人，等病人身体内的能量慢慢地、不断地补充足了，再适当地配合一些按摩、配合少量的活动疏通经络，这些辅助手段更加有利于食物的消化、吸收、利用，而等到身体长得更硬朗、结实一些时，就不需要吃稀糊状的食物了，可以吃固体的食物了，这样循序渐进地调理，人的身体状况和精神状况会得到改善，很多的疾病就会缓解或治愈了。 而当身体内的正气足了，也就是身体内气血充足的时候，各种疾病在人体自身存在的强大的自愈能力面前，自然败下阵去，这就是“正气存内，邪不可干”。当然，对重病患者，要想让身体自身的抵抗力和自愈能力恢复到正常人的地步是困难的，是需要量变到质变的过程的。但正确的方法，可以减轻身体状况继续恶化的程度，也可以减缓身体状况继续恶化的速度。因此，无论患了什么重病，都不能抱着顺其自然、听天由命的态度，更不能自暴自弃，积极的态度、正确的理念及方法，对身体保健及康复是大有好处的，不管是对健康人，还是对患了重病的人。 无舌苔:多见于久病虚弱之人。还有的人是感冒、发热的时候是白苔，可用了消炎药后不但白苔褪去了，连舌质上的舌苔也没了，这种情况说明胃、肠的功能虚弱了，而等停了药，用食物调养一段时间后，舌苔又会慢慢地显露出来。这种情况在孩子身上表现得非常明显。所以从各方面保护好胃肠，就能保证吃的食物能及时消化吸收，而吃的食物能及时的消化吸收，又可以反过来营养胃肠，胃肠的功能正常了，舌苔就不会出现这种异常的现象了。 舌苔主要集中在舌中间、舌根部:因舌苔的中间反映的是脾胃的情况，舌根部反映的是肾脏的情况，所以舌苔集中在中间，说明脾胃有问题，舌苔集中在舌根部就是肾脏有问题了。 舌苔白集中在中间，说明脾胃有寒，舌苔白集中在舌根部说明肾脏有寒。 舌苔中间的部位各种变化比较多，这个部位比较容易观察。舌根部位一般都与舌中间的变化是相连的，舌中间的变化在好转，舌根部的舌苔也会随之改变的。 appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. Depth of undercut should be less than or equal to 0.5 mm, total length of the welds on both sides undercut not exceed 10% of the weld length, and long continuous should not be greater than 100 mm. Wrong side should be less than or at 0.2T, and should not be greater than 2 mm (wall thickness mm t) incomplete or not allow 7.5 7.5.1 installation quality process standards of the electrical enclosure Cabinet surface is clean, neat, no significant phenomenon of convex, close to nature, close the door. 7.5.2 Cabinet Cabinet face paints no paint, returned to rusted, consistent color. 7.5.3 uniform indirect gap from top to bottom, slot width <1.5mm 7.5.4 adjacent Cabinet surface roughness is 0. 7.5.5 the cabinets firmly fixed, crafts beautiful. 7.5.6 Cabinet surface gauge, switch cabinet mark clear, neat, firm paste. 7.5.7 Terminal row of neat, is reliable, the appearance is clean and not damaged. 7.5.8 cables neat and clean, solid binding, binding process in appearance. 7.5.9 the first cable production firm, crafts beautiful, clear signage does not fade. 7.5.10 fireproof plugging tight, no cracks and pores. 7.6 7.6.1 of the standard electrical wiring quality technology cable a, the multi-core wire bunch arrangement should be parallel to each other, horizontal wire harness or wire should be perpendicular to the longitudinal multi-core wire bunch. The distance between the wire harness and wire harness symmetry, and as close as possible. B-core wiring harness into round, multi-core wire bunch used g wire binding, fastening [此贴子已经被作者于2009-5-25 0:53:01编辑过] 马悦凌糕(固元膏)淘宝官方店 支持(9) 中立(0) 反对(0) 评论此贴 | 李美志小大 2楼 个性首页 | QQ | 信息 | 搜索 | 主页 | UC 加好友 发短信 工程师 身份:所长 参与:712 人气:0 热帖:7 注册:2008-9-8 22:00:00 Post By:2009-5-11 6:04:00 坐沙发学习～马老师，说实话，这一段我还真分不清各种情况，没有对比呀，真希望您开班手把手传系统传授您的理论特别是新书的问诊方法～ 支持(0) 中立(0) 反对(1) 评论此贴 | lixiuhong888888小大 3楼 个性首页 | QQ | 信息 | 搜索 | 主页 | UC 加好友 发短信 appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. Depth of undercut should be less than or equal to 0.5 mm, total length of the welds on both sides undercut not exceed 10% of the weld length, and long continuous should not be greater than 100 mm. Wrong side should be less than or at 0.2T, and should not be greater than 2 mm (wall thickness mm t) incomplete or not allow 7.5 7.5.1 installation quality process standards of the electrical enclosure Cabinet surface is clean, neat, no significant phenomenon of convex, close to nature, close the door. 7.5.2 Cabinet Cabinet face paints no paint, returned to rusted, consistent color. 7.5.3 uniform indirect gap from top to bottom, slot width <1.5mm 7.5.4 adjacent Cabinet surface roughness is 0. 7.5.5 the cabinets firmly fixed, crafts beautiful. 7.5.6 Cabinet surface gauge, switch cabinet mark clear, neat, firm paste. 7.5.7 Terminal row of neat, is reliable, the appearance is clean and not damaged. 7.5.8 cables neat and clean, solid binding, binding process in appearance. 7.5.9 the first cable production firm, crafts beautiful, clear signage does not fade. 7.5.10 fireproof plugging tight, no cracks and pores. 7.6 7.6.1 of the standard electrical wiring quality technology cable a, the multi-core wire bunch arrangement should be parallel to each other, horizontal wire harness or wire should be perpendicular to the longitudinal multi-core wire bunch. The distance between the wire harness and wire harness symmetry, and as close as possible. B-core wiring harness into round, multi-core wire bunch used g wire binding, fastening 身份:老城通 参与:435 人气:0 热帖:1 注册:2009-4-22 10:38:00 Post By:2009-5-11 8:24:00 馬老師辛苦了～學習了～～～ 支持(0) 中立(0) 反对(0) 评论此贴 | wjpms小大 4楼 个性首页 | 信息 | 搜索 | 主页 | UC 加好友 发短信 身份:新朋友 参与:44 人气:0 热帖:0 注册:2009-5-11 11:51:00 Post By:2009-5-11 11:54:00 馬老師辛苦了～學習了 appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. Depth of undercut should be less than or equal to 0.5 mm, total length of the welds on both sides undercut not exceed 10% of the weld length, and long continuous should not be greater than 100 mm. Wrong side should be less than or at 0.2T, and should not be greater than 2 mm (wall thickness mm t) incomplete or not allow 7.5 7.5.1 installation quality process standards of the electrical enclosure Cabinet surface is clean, neat, no significant phenomenon of convex, close to nature, close the door. 7.5.2 Cabinet Cabinet face paints no paint, returned to rusted, consistent color. 7.5.3 uniform indirect gap from top to bottom, slot width <1.5mm 7.5.4 adjacent Cabinet surface roughness is 0. 7.5.5 the cabinets firmly fixed, crafts beautiful. 7.5.6 Cabinet surface gauge, switch cabinet mark clear, neat, firm paste. 7.5.7 Terminal row of neat, is reliable, the appearance is clean and not damaged. 7.5.8 cables neat and clean, solid binding, binding process in appearance. 7.5.9 the first cable production firm, crafts beautiful, clear signage does not fade. 7.5.10 fireproof plugging tight, no cracks and pores. 7.6 7.6.1 of the standard electrical wiring quality technology cable a, the multi-core wire bunch arrangement should be parallel to each other, horizontal wire harness or wire should be perpendicular to the longitudinal multi-core wire bunch. The distance between the wire harness and wire harness symmetry, and as close as possible. B-core wiring harness into round, multi-core wire bunch used g wire binding, fastening 支持(0) 中立(0) 反对(0) 评论此贴 | 夜兰香小大 5楼 个性首页 | 信息 | 搜索 | 主页 | UC 加好友 发短信 身份:新朋友 参与:3 人气:0 热帖:0 注册:2009-5-11 13:45:00 Post By:2009-5-11 14:06:00 谢谢了～又学习了不少中医的知识～ 支持(0) 中立(0) 反对(0) 评论此贴 | 悦凌粉丝小大 6楼 个性首页 | 信息 | 搜索 | 主页 | UC 加好友 发短信 身份:卫生员 参与:246 appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. Depth of undercut should be less than or equal to 0.5 mm, total length of the welds on both sides undercut not exceed 10% of the weld length, and long continuous should not be greater than 100 mm. Wrong side should be less than or at 0.2T, and should not be greater than 2 mm (wall thickness mm t) incomplete or not allow 7.5 7.5.1 installation quality process standards of the electrical enclosure Cabinet surface is clean, neat, no significant phenomenon of convex, close to nature, close the door. 7.5.2 Cabinet Cabinet face paints no paint, returned to rusted, consistent color. 7.5.3 uniform indirect gap from top to bottom, slot width <1.5mm 7.5.4 adjacent Cabinet surface roughness is 0. 7.5.5 the cabinets firmly fixed, crafts beautiful. 7.5.6 Cabinet surface gauge, switch cabinet mark clear, neat, firm paste. 7.5.7 Terminal row of neat, is reliable, the appearance is clean and not damaged. 7.5.8 cables neat and clean, solid binding, binding process in appearance. 7.5.9 the first cable production firm, crafts beautiful, clear signage does not fade. 7.5.10 fireproof plugging tight, no cracks and pores. 7.6 7.6.1 of the standard electrical wiring quality technology cable a, the multi-core wire bunch arrangement should be parallel to each other, horizontal wire harness or wire should be perpendicular to the longitudinal multi-core wire bunch. The distance between the wire harness and wire harness symmetry, and as close as possible. B-core wiring harness into round, multi-core wire bunch used g wire binding, fastening 人气:0 热帖:4 注册:2008-10-5 18:24:00 回复:(马悦凌)《马悦凌细说问诊单》 问舌苔白、黄... Post By:2009-5-11 22:02:00 学习 支持(0) 中立(0) 反对(0) 评论此贴 | bobo_2009小大 7楼 个性首页 | 信息 | 搜索 | 主页 | UC 加好友 发短信 身份:新朋友 参与:5 人气:0 热帖:0 注册:2009-5-12 9:43:00 Post By:2009-5-12 10:37:00 学习了，对我这样很不懂的人有很大帮助 支持(1) 中立(0) 反对(0) 评论此贴 | zong-ye小大 8楼 个性首页 | QQ | 信息 | 搜索 | 主页 | UC appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. Depth of undercut should be less than or equal to 0.5 mm, total length of the welds on both sides undercut not exceed 10% of the weld length, and long continuous should not be greater than 100 mm. Wrong side should be less than or at 0.2T, and should not be greater than 2 mm (wall thickness mm t) incomplete or not allow 7.5 7.5.1 installation quality process standards of the electrical enclosure Cabinet surface is clean, neat, no significant phenomenon of convex, close to nature, close the door. 7.5.2 Cabinet Cabinet face paints no paint, returned to rusted, consistent color. 7.5.3 uniform indirect gap from top to bottom, slot width <1.5mm 7.5.4 adjacent Cabinet surface roughness is 0. 7.5.5 the cabinets firmly fixed, crafts beautiful. 7.5.6 Cabinet surface gauge, switch cabinet mark clear, neat, firm paste. 7.5.7 Terminal row of neat, is reliable, the appearance is clean and not damaged. 7.5.8 cables neat and clean, solid binding, binding process in appearance. 7.5.9 the first cable production firm, crafts beautiful, clear signage does not fade. 7.5.10 fireproof plugging tight, no cracks and pores. 7.6 7.6.1 of the standard electrical wiring quality technology cable a, the multi-core wire bunch arrangement should be parallel to each other, horizontal wire harness or wire should be perpendicular to the longitudinal multi-core wire bunch. The distance between the wire harness and wire harness symmetry, and as close as possible. B-core wiring harness into round, multi-core wire bunch used g wire binding, fastening 加好友 发短信 身份:新朋友 参与:64 人气:0 热帖:0 注册:2009-4-29 20:13:00 Post By:2009-5-13 19:37:00 真希望您开班手把手传授您的理论及方法～,要是开班的话,我可在第一时间报 名了.谢谢! 支持(2) 中立(0) 反对(0) 评论此贴 | 冬桂小大 9楼 个性首页 | 信息 | 搜索 | 主页 | UC 加好友 发短信 身份:老城通 参与:377 人气:0 热帖:3 appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. Depth of undercut should be less than or equal to 0.5 mm, total length of the welds on both sides undercut not exceed 10% of the weld length, and long continuous should not be greater than 100 mm. Wrong side should be less than or at 0.2T, and should not be greater than 2 mm (wall thickness mm t) incomplete or not allow 7.5 7.5.1 installation quality process standards of the electrical enclosure Cabinet surface is clean, neat, no significant phenomenon of convex, close to nature, close the door. 7.5.2 Cabinet Cabinet face paints no paint, returned to rusted, consistent color. 7.5.3 uniform indirect gap from top to bottom, slot width <1.5mm 7.5.4 adjacent Cabinet surface roughness is 0. 7.5.5 the cabinets firmly fixed, crafts beautiful. 7.5.6 Cabinet surface gauge, switch cabinet mark clear, neat, firm paste. 7.5.7 Terminal row of neat, is reliable, the appearance is clean and not damaged. 7.5.8 cables neat and clean, solid binding, binding process in appearance. 7.5.9 the first cable production firm, crafts beautiful, clear signage does not fade. 7.5.10 fireproof plugging tight, no cracks and pores. 7.6 7.6.1 of the standard electrical wiring quality technology cable a, the multi-core wire bunch arrangement should be parallel to each other, horizontal wire harness or wire should be perpendicular to the longitudinal multi-core wire bunch. The distance between the wire harness and wire harness symmetry, and as close as possible. B-core wiring harness into round, multi-core wire bunch used g wire binding, fastening 注册:2009-2-19 22:46:00 Post By:2009-5-13 22:16:00 学习了。 支持(0) 中立(0) 反对(0) 评论此贴 | judy163小大 10楼 个性首页 | 信息 | 搜索 | 主页 | UC 加好友 发短信 身份:新朋友 参与:5 人气:0 热帖:0 注册:2009-3-25 23:41:00 Post By:2009-5-14 0:24:00 谢谢，自从看了老师的书，真的学到很多 支持(0) 中立(0) 反对(0) 评论此贴 | 论坛跳转到....?服务中心 ?新手小寨?健康养生 ?食疗心得 ?气血养生 ?养儿育女 ?心情客栈?与马悦凌面对面 ?马悦凌文选 ?马悦凌回复区?女性专区 ?女性健康 ?婚后空间 ?时尚扮靓 ?产后指南?病友社区 ?感冒专题 ?乙肝 ?高血压 ?胃病 ?痛风 ?糖尿病 ?同病相助 ?24小时答疑区?论坛办公室 ?固元膏区 ?艾条专区 ?新闻中心 下一主题 >> << 上一主题 总数 58 appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. Depth of undercut should be less than or equal to 0.5 mm, total length of the welds on both sides undercut not exceed 10% of the weld length, and long continuous should not be greater than 100 mm. Wrong side should be less than or at 0.2T, and should not be greater than 2 mm (wall thickness mm t) incomplete or not allow 7.5 7.5.1 installation quality process standards of the electrical enclosure Cabinet surface is clean, neat, no significant phenomenon of convex, close to nature, close the door. 7.5.2 Cabinet Cabinet face paints no paint, returned to rusted, consistent color. 7.5.3 uniform indirect gap from top to bottom, slot width <1.5mm 7.5.4 adjacent Cabinet surface roughness is 0. 7.5.5 the cabinets firmly fixed, crafts beautiful. 7.5.6 Cabinet surface gauge, switch cabinet mark clear, neat, firm paste. 7.5.7 Terminal row of neat, is reliable, the appearance is clean and not damaged. 7.5.8 cables neat and clean, solid binding, binding process in appearance. 7.5.9 the first cable production firm, crafts beautiful, clear signage does not fade. 7.5.10 fireproof plugging tight, no cracks and pores. 7.6 7.6.1 of the standard electrical wiring quality technology cable a, the multi-core wire bunch arrangement should be parallel to each other, horizontal wire harness or wire should be perpendicular to the longitudinal multi-core wire bunch. The distance between the wire harness and wire harness symmetry, and as close as possible. B-core wiring harness into round, multi-core wire bunch used g wire binding, fastening 1 2 3 4 5 6 下一页 固元膏缘怎样做冲鸡蛋才会更好吃 一些常见病基本食物疗法 分享我胆战心惊吃生泥鳅 马氏养生治好我多年便秘 感冒治愈足三里拍痧让身体更强壮 我期望夹杂着迷茫的养生 给儿子刮痧让他身体更好 今天，我给自己扎了四缝 我谈养生阻止寒凉食物引起的感冒 宝宝浓鼻涕让我一招搞定 第一次带爷爷来吃麦当劳 记我苦尽甘来的幸福生活 RSS2.0 Xhtml无图版 Xslt无图版 Copyright © 2000 - 2008 MaYueling.Com 本站所有言论，均为个人行为，仅供参考。 Powered By Dvbbs Version 8.2.0 页面执行时间 0.06250 秒, 2 次数据查询 appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. Depth of undercut should be less than or equal to 0.5 mm, total length of the welds on both sides undercut not exceed 10% of the weld length, and long continuous should not be greater than 100 mm. Wrong side should be less than or at 0.2T, and should not be greater than 2 mm (wall thickness mm t) incomplete or not allow 7.5 7.5.1 installation quality process standards of the electrical enclosure Cabinet surface is clean, neat, no significant phenomenon of convex, close to nature, close the door. 7.5.2 Cabinet Cabinet face paints no paint, returned to rusted, consistent color. 7.5.3 uniform indirect gap from top to bottom, slot width <1.5mm 7.5.4 adjacent Cabinet surface roughness is 0. 7.5.5 the cabinets firmly fixed, crafts beautiful. 7.5.6 Cabinet surface gauge, switch cabinet mark clear, neat, firm paste. 7.5.7 Terminal row of neat, is reliable, the appearance is clean and not damaged. 7.5.8 cables neat and clean, solid binding, binding process in appearance. 7.5.9 the first cable production firm, crafts beautiful, clear signage does not fade. 7.5.10 fireproof plugging tight, no cracks and pores. 7.6 7.6.1 of the standard electrical wiring quality technology cable a, the multi-core wire bunch arrangement should be parallel to each other, horizontal wire harness or wire should be perpendicular to the longitudinal multi-core wire bunch. The distance between the wire harness and wire harness symmetry, and as close as possible. B-core wiring harness into round, multi-core wire bunch used g wire binding, fastening