西藏 拉萨 美丽 神圣 赞美

西藏 拉萨 美丽 神圣 赞美 美丽拉萨 2011年大学毕业，11月18日从兰州出发，翻越昆仑山、唐古拉山、念青唐古拉山;掠过青海湖、措那湖、联通河、沱沱河;听着可可西里和那曲草原的风声， 11月19日不到30个小时完成了从黄土高原到青藏高原、从校园走入社会的漫长行程，一路向西到达拉萨。 一下车被誉为日光之城的拉萨首先展示了他的“热烈”， 顾不得饥肠辘辘，顾不得什么高反，狂喜的像个孩子。 对于西藏，最不好描述的，就是她的阳光，一望无际蔚蓝的天空中漂浮的几朵白云，才让你相信这不是电影镜头。说她灿烂，但怎样的程度才算是灿烂,说她明媚,但怎样的明亮才算是明媚,在被西藏的阳光晒得发红发黑发疼时，照射得完全睁不开眼睛时，我才觉得这阳光是那么刚烈，那么威猛。她是一种光的倾泻，光的奔腾，光的瀑布，从九天之上，狂野地飞泻而下，将一个辽阔的青藏高原，照射得山是山，水是水，树是树，草是草，一点不黏糊，丝毫不朦胧，亮堂、清晰，使人安静，也叫人疯狂，在藏语里“太阳”叫做“尼玛”，这绝不是我们口中的尼玛。 appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. Depth of undercut should be less than or equal to 0.5 mm, total length of the welds on both sides undercut not exceed 10% of the weld length, and long continuous should not be greater than 100 mm. Wrong side should be less than or at 0.2T, and should not be greater than 2 mm (wall thickness mm t) incomplete or not allow 7.5 7.5.1 installation quality process standards of the electrical enclosure Cabinet surface is clean, neat, no significant phenomenon of convex, close to nature, close the door. 7.5.2 Cabinet Cabinet face paints no paint, returned to rusted, consistent color. 7.5.3 uniform indirect gap from top to bottom, slot width <1.5mm 7.5.4 adjacent Cabinet surface roughness is 0. 7.5.5 the cabinets firmly fixed, crafts beautiful. 7.5.6 Cabinet surface gauge, switch cabinet mark clear, neat, firm paste. 7.5.7 Terminal row of neat, is reliable, the appearance is clean and not damaged. 7.5.8 cables neat and clean, solid binding, binding process in appearance. 7.5.9 the first cable production firm, crafts beautiful, clear signage does not fade. 7.5.10 fireproof plugging tight, no cracks and pores. 7.6 7.6.1 of the standard electrical wiring quality technology cable a, the multi-core wire bunch arrangement should be parallel to each other, horizontal wire harness or wire should be perpendicular to the longitudinal multi-core wire bunch. The distance between the wire harness and wire harness symmetry, and as close as possible. B-core wiring harness into round, multi-core wire bunch used g wire binding, fastening 在拉萨，逛街自然是去八角街，见到佛塔必须顺时针绕行，整个八廓街上十米来宽的街道两边各种极富民族特色的商品琳琅满目，下到几元、十几元的藏式挂件、手镯、项链，上至几千元、上万元的唐卡、服饰。 在八廓街上一定会看到裹着护腿、头戴防暴头盔、手持警棍或防暴枪的武警战士沿街巡逻，不远处的商铺屋顶还会有武警战士目注视着街上的人流。询问得知，自08年“3.14”事件之后，不仅拉萨的各广场、主要路口、寺庙及周边加油站都有武警或防暴警察执勤把守，而且有便衣散布于大街小巷，同时规定藏人从此不得佩戴藏刀上街。以前听人说在拉萨逛街没有身份证寸步难行，还会被抓。这一情况在此后的日子中得到了证实，在八角街自然要去玛吉阿米„„就是人们口中的“艳遇墙”，因为国内外游客或者说少男少女都会来这里。游客来这里不为别的只为第六世达赖喇嘛仓央嘉措----一位多情的诗人，你也许不知道他，但你一定知道他的诗: 你见 或者不见我 我就在那里 不悲 不喜 你念 或者不念我 情就在那里 不来 不去 你爱 或者不爱我 爱就在那里 不增 不减 你跟 或者不跟我 我的手就在你手里 不舍 不弃 appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. Depth of undercut should be less than or equal to 0.5 mm, total length of the welds on both sides undercut not exceed 10% of the weld length, and long continuous should not be greater than 100 mm. Wrong side should be less than or at 0.2T, and should not be greater than 2 mm (wall thickness mm t) incomplete or not allow 7.5 7.5.1 installation quality process standards of the electrical enclosure Cabinet surface is clean, neat, no significant phenomenon of convex, close to nature, close the door. 7.5.2 Cabinet Cabinet face paints no paint, returned to rusted, consistent color. 7.5.3 uniform indirect gap from top to bottom, slot width <1.5mm 7.5.4 adjacent Cabinet surface roughness is 0. 7.5.5 the cabinets firmly fixed, crafts beautiful. 7.5.6 Cabinet surface gauge, switch cabinet mark clear, neat, firm paste. 7.5.7 Terminal row of neat, is reliable, the appearance is clean and not damaged. 7.5.8 cables neat and clean, solid binding, binding process in appearance. 7.5.9 the first cable production firm, crafts beautiful, clear signage does not fade. 7.5.10 fireproof plugging tight, no cracks and pores. 7.6 7.6.1 of the standard electrical wiring quality technology cable a, the multi-core wire bunch arrangement should be parallel to each other, horizontal wire harness or wire should be perpendicular to the longitudinal multi-core wire bunch. The distance between the wire harness and wire harness symmetry, and as close as possible. B-core wiring harness into round, multi-core wire bunch used g wire binding, fastening 来我的怀里 或者 让我住进你的心里 默然 相爱 寂 静 欢喜 那一天 我闭目在经殿的香雾中 蓦然听见你诵经中的真言 那一月 我摇动所有的经筒 不为超度 只为触摸你的指尖 那一年 我磕长头匍匐在山路 不为觐见 只为贴着你的温暖 那一世 我转山转水转佛塔 不为修来世 只为途中与你相见 相传仓央嘉措的情诗就是写给姑娘玛吉阿米的，而如今玛吉阿米就是一个茶馆的名字，据说这个茶馆的地理位置就是当年仓央嘉措和玛吉阿米约会的地方。来这里人们只是想感受一种佛与人的爱情，当然不少人是为了艳遇而去。所以现在你说玛吉阿米人们会想到艳遇墙，同样你说艳遇墙人们就知道是指玛吉阿米。 在人们的固有印象中，西藏的土地必定都被草原、雪山所覆盖，一派“风吹草低现牛羊”的苍茫景象，我亦不例外。但是，当我到达林芝地区之后这一观念被彻底颠覆了。 沿拉萨河向东逆流而行，沿途经过松赞干布出生之地的墨竹工卡，翻过海拔5013米的米拉山口进入林芝地区，沿途绿色植被越来appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. Depth of undercut should be less than or equal to 0.5 mm, total length of the welds on both sides undercut not exceed 10% of the weld length, and long continuous should not be greater than 100 mm. Wrong side should be less than or at 0.2T, and should not be greater than 2 mm (wall thickness mm t) incomplete or not allow 7.5 7.5.1 installation quality process standards of the electrical enclosure Cabinet surface is clean, neat, no significant phenomenon of convex, close to nature, close the door. 7.5.2 Cabinet Cabinet face paints no paint, returned to rusted, consistent color. 7.5.3 uniform indirect gap from top to bottom, slot width <1.5mm 7.5.4 adjacent Cabinet surface roughness is 0. 7.5.5 the cabinets firmly fixed, crafts beautiful. 7.5.6 Cabinet surface gauge, switch cabinet mark clear, neat, firm paste. 7.5.7 Terminal row of neat, is reliable, the appearance is clean and not damaged. 7.5.8 cables neat and clean, solid binding, binding process in appearance. 7.5.9 the first cable production firm, crafts beautiful, clear signage does not fade. 7.5.10 fireproof plugging tight, no cracks and pores. 7.6 7.6.1 of the standard electrical wiring quality technology cable a, the multi-core wire bunch arrangement should be parallel to each other, horizontal wire harness or wire should be perpendicular to the longitudinal multi-core wire bunch. The distance between the wire harness and wire harness symmetry, and as close as possible. B-core wiring harness into round, multi-core wire bunch used g wire binding, fastening 越多，虽然大多为灌木和青草，只有少量的高大乔木，但在青藏高原之上这样的景色也足以令人赏心悦目。 到达林芝，才知道西藏也有江南，雾霭笼罩着山水，山水呼应着蓝天，雪山和蓝天同在，无与伦比的美。感叹林芝自然条件的优越，不仅是巴松措，在卡定沟、在柏树林、在尼洋河沿途„„你会误以为自己已经置身于内地的江南。 那碧水那松山，竹林总会叫你想起电影【英雄】、【卧虎藏龙】水面竹林打斗的片段，用一位同事的话说“风景如画，江山如梦”。 藏人按传统的宗教信仰，继续着他们的生活，布达拉宫、大昭寺、小昭寺、哲蚌寺和无数神山依然屹立，它以无言的圣洁，默默的接受着朝拜、虔诚、谎言、亵渎„„ 在我看来世间的一切朝拜，归结拢来，就是在朝拜光明，在西藏这块土地上，无论是土著民族，还是来自远方的游人，阳光，远比布达拉宫的金顶更加耀眼的直刺我们追寻的眸子。 我总觉得藏人尤其身在偏僻的牧区的藏人是孤独的，放牧、放牧„„日落又日出，没有看见过大都市的高铁、大都市的繁华。 appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. Depth of undercut should be less than or equal to 0.5 mm, total length of the welds on both sides undercut not exceed 10% of the weld length, and long continuous should not be greater than 100 mm. Wrong side should be less than or at 0.2T, and should not be greater than 2 mm (wall thickness mm t) incomplete or not allow 7.5 7.5.1 installation quality process standards of the electrical enclosure Cabinet surface is clean, neat, no significant phenomenon of convex, close to nature, close the door. 7.5.2 Cabinet Cabinet face paints no paint, returned to rusted, consistent color. 7.5.3 uniform indirect gap from top to bottom, slot width <1.5mm 7.5.4 adjacent Cabinet surface roughness is 0. 7.5.5 the cabinets firmly fixed, crafts beautiful. 7.5.6 Cabinet surface gauge, switch cabinet mark clear, neat, firm paste. 7.5.7 Terminal row of neat, is reliable, the appearance is clean and not damaged. 7.5.8 cables neat and clean, solid binding, binding process in appearance. 7.5.9 the first cable production firm, crafts beautiful, clear signage does not fade. 7.5.10 fireproof plugging tight, no cracks and pores. 7.6 7.6.1 of the standard electrical wiring quality technology cable a, the multi-core wire bunch arrangement should be parallel to each other, horizontal wire harness or wire should be perpendicular to the longitudinal multi-core wire bunch. The distance between the wire harness and wire harness symmetry, and as close as possible. B-core wiring harness into round, multi-core wire bunch used g wire binding, fastening 开通微信以后我也玩起了漂流瓶，总会收到各种信息无一不达着孤独，烦恼，欲望。于是突然有那么一天我水到渠成的就顿悟了，相比我们的孤独，牧人的孤独是那么的饱满，温暖。与山水同在，沐浴阳光，无欲无求，世世代代„„ 西藏，总是与神秘连在一起;总是与庄严与肃穆连在一起;总是与凝视与仰望连在一起。这里是离天最近的地方;这里是离神最近的地方;这里也是离灵魂最近的地方吗,我不是一名朝圣者。但是，面对西藏，我却一次次驻足„„ 西藏，是异乡，也是故土。在这里，我们都是人类的原初的孩子，面对西藏，似有一些东西正远离我们而去，又似有一些东西莫名走来，在西藏，我宁愿将自己一年年流放。 appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. Depth of undercut should be less than or equal to 0.5 mm, total length of the welds on both sides undercut not exceed 10% of the weld length, and long continuous should not be greater than 100 mm. Wrong side should be less than or at 0.2T, and should not be greater than 2 mm (wall thickness mm t) incomplete or not allow 7.5 7.5.1 installation quality process standards of the electrical enclosure Cabinet surface is clean, neat, no significant phenomenon of convex, close to nature, close the door. 7.5.2 Cabinet Cabinet face paints no paint, returned to rusted, consistent color. 7.5.3 uniform indirect gap from top to bottom, slot width <1.5mm 7.5.4 adjacent Cabinet surface roughness is 0. 7.5.5 the cabinets firmly fixed, crafts beautiful. 7.5.6 Cabinet surface gauge, switch cabinet mark clear, neat, firm paste. 7.5.7 Terminal row of neat, is reliable, the appearance is clean and not damaged. 7.5.8 cables neat and clean, solid binding, binding process in appearance. 7.5.9 the first cable production firm, crafts beautiful, clear signage does not fade. 7.5.10 fireproof plugging tight, no cracks and pores. 7.6 7.6.1 of the standard electrical wiring quality technology cable a, the multi-core wire bunch arrangement should be parallel to each other, horizontal wire harness or wire should be perpendicular to the longitudinal multi-core wire bunch. The distance between the wire harness and wire harness symmetry, and as close as possible. B-core wiring harness into round, multi-core wire bunch used g wire binding, fastening