中国农业银行K宝使用说明

中国农业银行K宝使用 姓名:_________ 班级:_________ 学号:_________ ith. 3, fill embankment before base and completed the inspection and acceptance of works. 4, before the requirement level elevation sign layout according to the drawing, every nail on the level of a certain distance, elevation of forklift parts according to the design requirements set. 5, according to the site conditions determine the routes of earth-moving machinery, vehicles, and prior checks, reinforce and widen if necessary and other preparatory work. (B) construction processes and methods; 1, process: before filling, and statistics to the existing buildings and trees, the soil on the cave or on the surface of roots, trash and other debris to be cleared. 2, have the soil inspection work. Species of fill, size, check there is no debris, and soil moisture content control within the design range. Tier 3, fill casting: each layer thickness according to soil, density to determine requirements and equipment performance. 4, as needed when rolling, wheel (RAM) track lapping each other, prevent leaks RAM leakage. Aspect is high, filling segments. Each layer into slope-shaped seams, ground track about overlapping 0.5-1.0M, is less than the distance from the upper and lower joints 1M. 5, fill out the base surface, we will do the edge compaction quality assurance work. After the earth-moving, does not require trimming of the slope would be preferable to filling edge fill 0.5 m wide called slope rides on and shoot, wide filling 0.2m. 6, in machinery construction not rolling the filling position, manual blade filled with frog-type ramming machine or diesel hierarchical dynamic compaction-compacting. 9, rain during construction: (1) in the rain during embankment construction, we will be completed as soon as possible a continuous; face do not seek too large, hierarchical segment-by-film basis, important or special backfill, as completed by the rain. (2) in the rain at the time of construction, check all the rain 中国农业银行K宝使用说明 1、目的 该文档是农业银行K宝使用说明，其主要内容包括: , 安装与配置 , 操作说明 , 问题解决方法 2、范围 该文档定义了农业银行K宝使用说明，主要描述了农业银行K宝的操作以及问题的解决的方法 3、操作说明 1 首次使用 K 宝 农行新 K 宝产品无需附带光盘安装驱动与工具，将 K 宝插入计算机的 USB 接口， K 宝管理工具将自动安装。如果杀毒软件和防护软件设置为禁止自动启动 U 盘安装，那么就需要自己干预才能使用 K 宝。 使用鼠标右键点击 K 宝盘符，选择“打开”，点击左键进入下一级，在显示出的文件中双击“ setup.exe ”，即可完成安装。 2 下载 K 宝证书 第一步:登录中国农业银行网站首页www.abchina.com进入“证书向导”页面的“下载证书” 第二步:输入参考号和授权码后，单击“提交”按钮 第三步:系统根据客户两码判断该客户证书介质类型，根据使用的 K 宝类型，系统会自动检测客户端软件是否为最新版本、K 宝连接是否正常 第四步:设置 K 宝保护口令 ith. 3, fill embankment before base and completed the inspection and acceptance of works. 4, before the requirement level elevation sign layout according to the drawing, every nail on the level of a certain distance, elevation of forklift parts according to the design requirements set. 5, according to the site conditions determine the routes of earth-moving machinery, vehicles, and prior checks, reinforce and widen if necessary and other preparatory work. (B) construction processes and methods; 1, process: before filling, and statistics to the existing buildings and trees, the soil on the cave or on the surface of roots, trash and other debris to be cleared. 2, have the soil inspection work. Species of fill, size, check there is no debris, and soil moisture content control within the design range. Tier 3, fill casting: each layer thickness according to soil, density to determine requirements and equipment performance. 4, as needed when rolling, wheel (RAM) track lapping each other, prevent leaks RAM leakage. Aspect is high, filling segments. Each layer into slope-shaped seams, ground track about overlapping 0.5-1.0M, is less than the distance from the upper and lower joints 1M. 5, fill out the base surface, we will do the edge compaction quality assurance work. After the earth-moving, does not require trimming of the slope would be preferable to filling edge fill 0.5 m wide called slope rides on and shoot, wide filling 0.2m. 6, in machinery construction not rolling the filling position, manual blade filled with frog-type ramming machine or diesel hierarchical dynamic compaction-compacting. 9, rain during construction: (1) in the rain during embankment construction, we will be completed as soon as possible a continuous; face do not seek too large, hierarchical segment-by-film basis, important or special backfill, as completed by the rain. (2) in the rain at the time of construction, check all the rain 第五步:在弹出的输入框中输入刚才设置的 K 宝密码。为增加安全性，对 K 宝密码输入框进行优化，采用虚拟窗口，能防止恶意软件盗取 K 宝密码 第六步:下载完成 3 K 宝工具软件说明书 K 宝工具共包括校验 K 宝口令、修改 K 宝口令、检测系统、修改 K 宝名称、显示证书、注册证书、注销证书、下载证书和帮助等功能。 3.1 修改 K 宝口令: 点击“修改 K 宝口令”按钮，输入原来的口令和两次新口令，点“确定”即可修改口令。 ith. 3, fill embankment before base and completed the inspection and acceptance of works. 4, before the requirement level elevation sign layout according to the drawing, every nail on the level of a certain distance, elevation of forklift parts according to the design requirements set. 5, according to the site conditions determine the routes of earth-moving machinery, vehicles, and prior checks, reinforce and widen if necessary and other preparatory work. (B) construction processes and methods; 1, process: before filling, and statistics to the existing buildings and trees, the soil on the cave or on the surface of roots, trash and other debris to be cleared. 2, have the soil inspection work. Species of fill, size, check there is no debris, and soil moisture content control within the design range. Tier 3, fill casting: each layer thickness according to soil, density to determine requirements and equipment performance. 4, as needed when rolling, wheel (RAM) track lapping each other, prevent leaks RAM leakage. Aspect is high, filling segments. Each layer into slope-shaped seams, ground track about overlapping 0.5-1.0M, is less than the distance from the upper and lower joints 1M. 5, fill out the base surface, we will do the edge compaction quality assurance work. After the earth-moving, does not require trimming of the slope would be preferable to filling edge fill 0.5 m wide called slope rides on and shoot, wide filling 0.2m. 6, in machinery construction not rolling the filling position, manual blade filled with frog-type ramming machine or diesel hierarchical dynamic compaction-compacting. 9, rain during construction: (1) in the rain during embankment construction, we will be completed as soon as possible a continuous; face do not seek too large, hierarchical segment-by-film basis, important or special backfill, as completed by the rain. (2) in the rain at the time of construction, check all the rain 3.2 检测系统和工具更新: 检测系统功能可以检测 K 宝的当前状态，当 K 宝使用过程中出现问题时，可先使用该检测功能自检，初步判断问题所在，工具自动更新的功能也在检测系统中。 点击“更新 K 宝工具”按钮，在弹出的对话框中，点“是”按钮，即可更新 K 宝工具。 3.3 证书操作 K 宝管理工具中提供证书的查看，注册和注销。 3.3.1 注册证书 使用 K 宝安全证书时，将 K 宝插入计算机， K 宝内的安全证书会自动注册，无须人工操作。如果自动注册不成功，可以使用手动方法注册。启动 K 宝工具软件，主界面将显示 K 宝内所有安全证书的列表。选择列表中希望注册的证书，单击“注册证书”按钮，即可完成手动注册。 ith. 3, fill embankment before base and completed the inspection and acceptance of works. 4, before the requirement level elevation sign layout according to the drawing, every nail on the level of a certain distance, elevation of forklift parts according to the design requirements set. 5, according to the site conditions determine the routes of earth-moving machinery, vehicles, and prior checks, reinforce and widen if necessary and other preparatory work. (B) construction processes and methods; 1, process: before filling, and statistics to the existing buildings and trees, the soil on the cave or on the surface of roots, trash and other debris to be cleared. 2, have the soil inspection work. Species of fill, size, check there is no debris, and soil moisture content control within the design range. Tier 3, fill casting: each layer thickness according to soil, density to determine requirements and equipment performance. 4, as needed when rolling, wheel (RAM) track lapping each other, prevent leaks RAM leakage. Aspect is high, filling segments. Each layer into slope-shaped seams, ground track about overlapping 0.5-1.0M, is less than the distance from the upper and lower joints 1M. 5, fill out the base surface, we will do the edge compaction quality assurance work. After the earth-moving, does not require trimming of the slope would be preferable to filling edge fill 0.5 m wide called slope rides on and shoot, wide filling 0.2m. 6, in machinery construction not rolling the filling position, manual blade filled with frog-type ramming machine or diesel hierarchical dynamic compaction-compacting. 9, rain during construction: (1) in the rain during embankment construction, we will be completed as soon as possible a continuous; face do not seek too large, hierarchical segment-by-film basis, important or special backfill, as completed by the rain. (2) in the rain at the time of construction, check all the rain 3.3.2 注销证书 使用 K 宝安全证书后，将 K 宝从计算机拔下时，系统会自动注销已注册的安全证书，无须人工操作。如果自动注销不成功，可以使用手动方法注销。启动 K 宝工具软件，主界面将显示 K 宝内所有安全证书的列表，选择列表中希望注销的证书，单击“注销证书”按钮，即可完成注销。 3.4 下载证书 “下载证书”按钮封装了农行下载证书页面的链接，只需点下鼠标就可以跳转到证书下载页面，输入工作人员给的相应参考号和授权码，即可下载证书。 3.5 帮助 集合了常见问题与解决方法，在网银操作中遇到的问题，可以直接点击“帮助”来找到答案。 4 常见问题与解决方法 1 、使用的是哪个厂家生产的 K 宝, ith. 3, fill embankment before base and completed the inspection and acceptance of works. 4, before the requirement level elevation sign layout according to the drawing, every nail on the level of a certain distance, elevation of forklift parts according to the design requirements set. 5, according to the site conditions determine the routes of earth-moving machinery, vehicles, and prior checks, reinforce and widen if necessary and other preparatory work. (B) construction processes and methods; 1, process: before filling, and statistics to the existing buildings and trees, the soil on the cave or on the surface of roots, trash and other debris to be cleared. 2, have the soil inspection work. Species of fill, size, check there is no debris, and soil moisture content control within the design range. Tier 3, fill casting: each layer thickness according to soil, density to determine requirements and equipment performance. 4, as needed when rolling, wheel (RAM) track lapping each other, prevent leaks RAM leakage. Aspect is high, filling segments. Each layer into slope-shaped seams, ground track about overlapping 0.5-1.0M, is less than the distance from the upper and lower joints 1M. 5, fill out the base surface, we will do the edge compaction quality assurance work. After the earth-moving, does not require trimming of the slope would be preferable to filling edge fill 0.5 m wide called slope rides on and shoot, wide filling 0.2m. 6, in machinery construction not rolling the filling position, manual blade filled with frog-type ramming machine or diesel hierarchical dynamic compaction-compacting. 9, rain during construction: (1) in the rain during embankment construction, we will be completed as soon as possible a continuous; face do not seek too large, hierarchical segment-by-film basis, important or special backfill, as completed by the rain. (2) in the rain at the time of construction, check all the rain 解决方法:使用的是北京握奇智能科技有限公司生产的 K 宝产品。从网上下载 K 宝管理工具，请务必注意厂家名称。 2 、如何自动安装 K 宝管理工具,自动安装被系统屏蔽了怎么办, 解决方法:农行新 K 宝产品无需附带光盘安装驱动与工具。将 K 宝插入计算机的 USB 接口， K 宝管理工具将自动安装。如果杀毒软件或防护软件设置为禁止自动启动 U 盘安装，那么就需要自己干预才能使用 K 宝。使用鼠标右键点击 K 宝盘符，选择“打开”，点击左键进入下一级，在显示出的文件中双击“ setup.exe ”，即可完成安装。 3 、如何下载证书, 解决方法:首次下载证书流程如下六步: (1) 登录中国农业银行网站首页www.abchina.com，进入“证书向导”页面的“下载证书”。 (2) 输入参考号和授权码后，单击“提交”按钮。 (3) 系统根据参考号和授权码来判断该证书介质类型，根据使用的 K 宝类型，系统会自动检测客户端软件是否为最新版本、客户端 K 宝驱动是否安装正常、K 宝连接是否正常。 (4) 设置 K 宝保护口令。 (5) 在弹出的输入框中输入刚才设置的 K 宝密码。为增加安全性，对 K 宝密码输入框进行优化，采用虚拟窗口，能防止恶意软件盗取 K 宝密码。 (6) 下载完成。 首次成功下载证书后，可以使用该证书登录网银，然后通过证书更新来获取参考号和授权码，再使用得到的参考号和授权码来更新证书。 、 K 宝口令是什么, 4 解决方法: K 宝的口令是用来管理 K 宝安全的密码，该密码在下载中国农业银行证书时设置，由自己亲自保管。在使用 K 宝做支付、转账等账户操作时，需要使用口令控制 K 宝的工作，保障的账户安全。 5 、 K 宝口令被锁怎么办, 解决方法:要带着相关证件，去中国农业银行的网点申请参考号和授权码，重新下载证书。 6 、 K 宝口令为什么被锁, 解决方法: K 宝有口令错误计数器，计数器为 6 ，K 宝就会被锁定。也就是说如果连续输错 6 次，出于对于账户安全的考虑，该 K 宝设备会被锁定。在锁定前，只要输对一次口令，错误计数器就会清零。 7 、 K 宝的初始口令是多少, 解决方法: K 宝的初始口令在下载证书的时候由自己亲自设置。 8 、在交易或转帐操作选择证书时，没有出现 K 宝的证书, 解决方法:如果 K 宝的证书没有注册在 IE 浏览器中，会出现该错误，请将管理工具打开，并选中要使用的证书点击“注册证书”。 ith. 3, fill embankment before base and completed the inspection and acceptance of works. 4, before the requirement level elevation sign layout according to the drawing, every nail on the level of a certain distance, elevation of forklift parts according to the design requirements set. 5, according to the site conditions determine the routes of earth-moving machinery, vehicles, and prior checks, reinforce and widen if necessary and other preparatory work. (B) construction processes and methods; 1, process: before filling, and statistics to the existing buildings and trees, the soil on the cave or on the surface of roots, trash and other debris to be cleared. 2, have the soil inspection work. Species of fill, size, check there is no debris, and soil moisture content control within the design range. Tier 3, fill casting: each layer thickness according to soil, density to determine requirements and equipment performance. 4, as needed when rolling, wheel (RAM) track lapping each other, prevent leaks RAM leakage. Aspect is high, filling segments. Each layer into slope-shaped seams, ground track about overlapping 0.5-1.0M, is less than the distance from the upper and lower joints 1M. 5, fill out the base surface, we will do the edge compaction quality assurance work. After the earth-moving, does not require trimming of the slope would be preferable to filling edge fill 0.5 m wide called slope rides on and shoot, wide filling 0.2m. 6, in machinery construction not rolling the filling position, manual blade filled with frog-type ramming machine or diesel hierarchical dynamic compaction-compacting. 9, rain during construction: (1) in the rain during embankment construction, we will be completed as soon as possible a continuous; face do not seek too large, hierarchical segment-by-film basis, important or special backfill, as completed by the rain. (2) in the rain at the time of construction, check all the rain 安全:将农行网站设为可信站点。 隐私:安全级别为“中”，“阻止弹出窗口”前不要勾。 ith. 3, fill embankment before base and completed the inspection and acceptance of works. 4, before the requirement level elevation sign layout according to the drawing, every nail on the level of a certain distance, elevation of forklift parts according to the design requirements set. 5, according to the site conditions determine the routes of earth-moving machinery, vehicles, and prior checks, reinforce and widen if necessary and other preparatory work. (B) construction processes and methods; 1, process: before filling, and statistics to the existing buildings and trees, the soil on the cave or on the surface of roots, trash and other debris to be cleared. 2, have the soil inspection work. Species of fill, size, check there is no debris, and soil moisture content control within the design range. Tier 3, fill casting: each layer thickness according to soil, density to determine requirements and equipment performance. 4, as needed when rolling, wheel (RAM) track lapping each other, prevent leaks RAM leakage. Aspect is high, filling segments. Each layer into slope-shaped seams, ground track about overlapping 0.5-1.0M, is less than the distance from the upper and lower joints 1M. 5, fill out the base surface, we will do the edge compaction quality assurance work. After the earth-moving, does not require trimming of the slope would be preferable to filling edge fill 0.5 m wide called slope rides on and shoot, wide filling 0.2m. 6, in machinery construction not rolling the filling position, manual blade filled with frog-type ramming machine or diesel hierarchical dynamic compaction-compacting. 9, rain during construction: (1) in the rain during embankment construction, we will be completed as soon as possible a continuous; face do not seek too large, hierarchical segment-by-film basis, important or special backfill, as completed by the rain. (2) in the rain at the time of construction, check all the rain 9 、注册证书到 IE 中出现的问题 解决方法:打开 IE 浏览器，单击“工具”菜单下的“Internet 选项”，然后选择“内容”选项卡，再单击“证书”按钮，“个人”栏中内容空白，没有任何证书显示，则表明没有注册过证书，那就要注册数字证书。 打开 IE 浏览器，单击“工具”菜单下的“Internet 选项”，然后选择“内容”选项卡，再单击“证书”按钮，弹出“证书”对话框，单击“常规” 按钮，发现“证书信息”下显示:“ Windows 没有足够信息，不能验证该证书。”则表明没有注册数字证书的根证书，需要注册数字证书的根证书。 打开 IE 浏览器，单击“工具”菜单下的“Internet 选项”，然后选择“内容”选项卡，再单击“证书”按钮，弹出“证书”对话框，单击“常规”按钮，发现“证书信息”下显示:“该证书已过期，或者尚未生效。”则表明证书可能:?证书已经过期，证书有效期可通过显示证书功能查看，如果已经过期，就到农行营业网点进行咨询如何办理证书更新;?计算机系统时间不在证书的有效期内，查看该计算机的系统时间是否正确。 ith. 3, fill embankment before base and completed the inspection and acceptance of works. 4, before the requirement level elevation sign layout according to the drawing, every nail on the level of a certain distance, elevation of forklift parts according to the design requirements set. 5, according to the site conditions determine the routes of earth-moving machinery, vehicles, and prior checks, reinforce and widen if necessary and other preparatory work. (B) construction processes and methods; 1, process: before filling, and statistics to the existing buildings and trees, the soil on the cave or on the surface of roots, trash and other debris to be cleared. 2, have the soil inspection work. Species of fill, size, check there is no debris, and soil moisture content control within the design range. Tier 3, fill casting: each layer thickness according to soil, density to determine requirements and equipment performance. 4, as needed when rolling, wheel (RAM) track lapping each other, prevent leaks RAM leakage. Aspect is high, filling segments. Each layer into slope-shaped seams, ground track about overlapping 0.5-1.0M, is less than the distance from the upper and lower joints 1M. 5, fill out the base surface, we will do the edge compaction quality assurance work. After the earth-moving, does not require trimming of the slope would be preferable to filling edge fill 0.5 m wide called slope rides on and shoot, wide filling 0.2m. 6, in machinery construction not rolling the filling position, manual blade filled with frog-type ramming machine or diesel hierarchical dynamic compaction-compacting. 9, rain during construction: (1) in the rain during embankment construction, we will be completed as soon as possible a continuous; face do not seek too large, hierarchical segment-by-film basis, important or special backfill, as completed by the rain. (2) in the rain at the time of construction, check all the rain 10 、插入 K 宝后，K 宝管理工具显示无法连接, 解决方法:解决方法:请检查 K 宝工作指示灯是否亮、 USB 口是否被其他设备占用、 USB 口是否被禁用，并查看“设备管理器”中是否识别 K 宝设备。 11 、如果电脑系统重装了，那数字证书是否还能使用, 解决方法:由于证书是保存在 K 宝上的，重装完电脑系统后只需再重新安装 K 宝工具，并将证书注册到 IE 浏览器中就可以继续使用数字证书，不会有影响。 12 、 K 宝管理工具安装时都做了什么, 解决方法:工具会先复制 K 宝管理工具的程序文件到电脑中;将中国农业银行网银相关地址加入可信站点中; 配置电脑的注册表，注册网银需要调用的组件。(如果在安装过程中的杀毒软件提出警报，仔细辨别提示的信息，通过认证) K 宝管理工具能够解决哪些问题, 13 、重装 解决方法:重装 K 宝管理工具能够解决控件未注册、文件丢失、修复 K 宝相关文件等问题。 14 、如果 K 宝插入后 K 宝管理工具不能及时识别，如何解决, 解决方法:中国农业银行的新 K 宝产品自带 K 宝管理工具在插入计算机时，系统会检查 K 宝中的工具安装程序，这个过程需要几秒的时间。 15 、 IE 的安全选项如何设置, 解决方法: K 宝工具安装时会将 IE 的安全设置自动做好，但如果被其他程序或者手动设置过导致网银不能正常使用，则需要手动设置回。 操作方法如下: 安全选项卡:将农行网站设为可信站点 隐私选项卡:安全级别为“中”，“阻止弹出窗口”前不要勾。 ith. 3, fill embankment before base and completed the inspection and acceptance of works. 4, before the requirement level elevation sign layout according to the drawing, every nail on the level of a certain distance, elevation of forklift parts according to the design requirements set. 5, according to the site conditions determine the routes of earth-moving machinery, vehicles, and prior checks, reinforce and widen if necessary and other preparatory work. (B) construction processes and methods; 1, process: before filling, and statistics to the existing buildings and trees, the soil on the cave or on the surface of roots, trash and other debris to be cleared. 2, have the soil inspection work. Species of fill, size, check there is no debris, and soil moisture content control within the design range. Tier 3, fill casting: each layer thickness according to soil, density to determine requirements and equipment performance. 4, as needed when rolling, wheel (RAM) track lapping each other, prevent leaks RAM leakage. Aspect is high, filling segments. Each layer into slope-shaped seams, ground track about overlapping 0.5-1.0M, is less than the distance from the upper and lower joints 1M. 5, fill out the base surface, we will do the edge compaction quality assurance work. After the earth-moving, does not require trimming of the slope would be preferable to filling edge fill 0.5 m wide called slope rides on and shoot, wide filling 0.2m. 6, in machinery construction not rolling the filling position, manual blade filled with frog-type ramming machine or diesel hierarchical dynamic compaction-compacting. 9, rain during construction: (1) in the rain during embankment construction, we will be completed as soon as possible a continuous; face do not seek too large, hierarchical segment-by-film basis, important or special backfill, as completed by the rain. (2) in the rain at the time of construction, check all the rain 16 、如何解决登录农行网银时弹出“该页无法显示”, 解决方法:单击“工具”菜单的“ Internet 选项”，然后选择“内容”选项卡，再单击“清除 SSL 状态” 按钮。 ith. 3, fill embankment before base and completed the inspection and acceptance of works. 4, before the requirement level elevation sign layout according to the drawing, every nail on the level of a certain distance, elevation of forklift parts according to the design requirements set. 5, according to the site conditions determine the routes of earth-moving machinery, vehicles, and prior checks, reinforce and widen if necessary and other preparatory work. (B) construction processes and methods; 1, process: before filling, and statistics to the existing buildings and trees, the soil on the cave or on the surface of roots, trash and other debris to be cleared. 2, have the soil inspection work. Species of fill, size, check there is no debris, and soil moisture content control within the design range. Tier 3, fill casting: each layer thickness according to soil, density to determine requirements and equipment performance. 4, as needed when rolling, wheel (RAM) track lapping each other, prevent leaks RAM leakage. Aspect is high, filling segments. Each layer into slope-shaped seams, ground track about overlapping 0.5-1.0M, is less than the distance from the upper and lower joints 1M. 5, fill out the base surface, we will do the edge compaction quality assurance work. After the earth-moving, does not require trimming of the slope would be preferable to filling edge fill 0.5 m wide called slope rides on and shoot, wide filling 0.2m. 6, in machinery construction not rolling the filling position, manual blade filled with frog-type ramming machine or diesel hierarchical dynamic compaction-compacting. 9, rain during construction: (1) in the rain during embankment construction, we will be completed as soon as possible a continuous; face do not seek too large, hierarchical segment-by-film basis, important or special backfill, as completed by the rain. (2) in the rain at the time of construction, check all the rain