玩转电脑开机关机(你不知道的)（Play the computer, turn on and off (you don´t know)）

玩转电脑开机关机(你不知道的)（Play the computer, turn on and off (you don´t know)） 玩转电脑开机关机(你不知道的)(Play the computer, turn on and off (you don't know)) Play the computer, turn on and off (you don't know) Update time: 2008-04-27 10:17:54, 551 users have read Mention boot the computer, many people think that this is too simple, just click the power button? In fact, in general, most people are exposed to the power supply is connected to the computer, just press the power button on the host computer to boot, but this is only the default boot a computer method. Although the commonly used boot is to press the power button, but a lot of times will cause inconvenience to us, such as the chassis on the hidden place, so that each boot "crosses the sea" to press the power switch to start the computer. There are many better ways to boot, just click the mouse, tap the keyboard, or let the computer automatically boot, etc., to find the right way, will make the boot easier. Method 1: the mouse boot is so easy Although the host will start button position of the humanized design, but after all, many friends will also host under the table or some hidden place, if every boot to drilling under the table, it is not too much of the "fashion"? Have you ever wondered if every time in the off state simply by a mouse, the computer will automatically boot, the convenient ah. In fact, as long as through the simple settings in BIOS, you can achieve the boot of the mouse. Open wake-up power First of all, the main board to open the wake-up system, in order to achieve the mouse or keyboard and other boot function. Step 1 Open the main chassis cover and find a jumper with a "KBPowerON" character (keyboard power on) on the motherboard. This is a jumper with three pins. In general, pin pin settings are provided next to jumpers. Step 2 "1-2Disabled" means closing the wake-up power; "2-3Enabled" indicates an open wake-up power supply. By default, the foot cap is inserted above the 1-2 and the foot cap is inserted into the 2-3. BIOS settings Step 1 Start the computer, when the computer checks itself. Press the DEL key on the keyboard to enter the BIOS interface. Step 2 Use the arrow keys on the keyboard to select the "PowerManagementSetup" item and enter the carriage to the settings interface. Step 3 Here, use the arrow keys on the keyboard to select the "PowerOnByMouse" setting item (Figure 3). This program provides DoubleClick, ShanClick, Disabled three key values, and in turn indicate double click boot, click boot, do not use the mouse boot. Step 4 If you want to set, double-click the left button to boot, you can use the keyboard "PgUP" or "PgDn" key, set here as "LeftDouble"". Step 5 After setting, press the "ESC" button on the keyboard to return to the previous interface. Then press the "F10" key to save and quit. At this point, the computer will restart the computer, after the system has been activated normally. Then turn off the system, and then, when the computer shuts down, double-click the left mouse button to turn on the computer. Method two keyboard boot is also very simple Just understand the mouse boot settings, although the mouse boot method is very simple, but now many of the mouse is using the USB interface, so you can not use this setting. And now the general keyboard or PS/2 interface. So in the absence of PS/2 mouse, you can also use BIOS settings to achieve the keyboard boot. And you can also set the keyboard password for the boot, so that other people can not control the boot of the computer, or quite interesting. Step 1 When setting up the keyboard boot, you need to install the above method first to open the power supply of the wake-up system of the motherboard. Then go to the BIOS settings screen, select the PowerManagementSetup item, and click enter. Step 2 When you get to the settings screen, select "PowerOnByKeyboard" on the left". Step 3 Press the "PageDown" or "PageUp" key on the keyboard, and the value should be "Password"". Step 4 Then select "KBPowerONPassword" and press the Enter key, in the "EnterPassword" input to set the password, and then press the Enter key, then enter the same password will be prompted again after the input, press enter to confirm. Step 5 Finally, press the "Esc" button to return to the previous interface. Then press the "F10" button to save the settings and exit BIOS. Method three practical hotkey boot It's really convenient to boot with a keyboard or mouse, and you can also set the boot password. Although this has played a role in protection, but when you need to play a string of characters on the boot, but also bring inconvenience to yourself. If you do not want to use these methods, you can also set the shortcut button on the keyboard to boot, This allows you to start your computer quickly by pressing the set hotkey. Step 1 Open the keyboard boot function by using the above method, and then find the "PowerOnFunction" setting project in the "IntegratedPeripherals" interface. Step 2 Under this item, you can see a "HotKeypowerON" option, select the item, and then press the keyboard "Ctrl+F1" or "Ctrl+F2" and other hot keys, so that in the "HotKeypowerON" behind the key value in the set of hot key. Step 3 Press the "F10" button to save the settings. Then turn off the computer. You can implement the hotkey boot function. Method four customize your computer's boot time A computer loving person who usually gets up, goes home from school or goes home from work, is the first thing to turn on the computer. If you follow this operation every day, we can set up a regular boot, so that when the specified time, the computer will automatically start, convenient for our frequent operation every day. Step 1 "Timing boot" before setting, also need to open the beginning of this article on the motherboard power wake-up function. First, start the wake-up function of the motherboard in accordance with the above method, and then go into the BIOS interface. Step 2 In the main interface, find the PowerMangementSetup menu and press enter. Step 3 Find the "ResumebyAlarm" item and set the key to "Enabled" so that the "real time clock control" function is enabled. Step 4 Set the system boot date option in the Date (ofMonth) Alarm entry. For example, set Everyday (daily), the computer will automatically boot according to this setting every day. Then, in the following Time (hh:mm:ssAlarm) item, set the system boot time (last / min / sec), then press the "F10" key to save and exit BIOS. Step 5 Finally, restart the computer, and then shut down the computer, then the computer will be able to boot for us at regular intervals.