为了正常的体验网站,请在浏览器设置里面开启Javascript功能!

14指状凹陷

2017-12-01 2页 doc 21KB 14阅读

用户头像

is_574951

暂无简介

举报
14指状凹陷14指状凹陷 14 Localised, glossy, finger-shaped depressions 14 局部的光泽指状凹陷 Alternative terms: "Tacky spots" 别名, 粘性斑点 Description: Glossy depressions, often near the sprue, at cores or in the vicinity of hot runner units 描述, 光泽凹陷,通常出现在流道、型芯或热流道单元附近 Possible causes:...
14指状凹陷
14指状凹陷 14 Localised, glossy, finger-shaped depressions 14 局部的光泽指状凹陷 Alternative terms: "Tacky spots" 别名, 粘性斑点 Description: Glossy depressions, often near the sprue, at cores or in the vicinity of hot runner units 描述, 光泽凹陷,通常出现在流道、型芯或热流道单元附近 Possible causes: 1 Holding pressure ineffective 2 Switch from injection to holding pressure made too soon 3 Mould temperature too high in places 4 Cooling time too short 可能的原因, 1 保压压力无效 2 注射到保压的切换太早 3 局部的模具温度太高 4 冷却时间太短 Remedial actions: 1 Increase holding pressure and holding pressure time 2 Switch to holding pressure at a later stage 3 Reduce mould temperature locally by means of additional cooling channels or separate temperature control 4 Extend cycle time 解决的措施, 1 增大保压压力和延长保压时间 2 推迟注射到保压的切换 3 通过增加额外的冷却流道或采用独立的温度控制来降低局部 的模具温度 4 延长冷却时间 Notes: See also 02 (Matt surface defects...) 注释, 参看02 (消光表面缺陷) Fault category: Gloss / Surface irregularities 缺陷类别, 光泽、表面不规则
/
本文档为【14指状凹陷】,请使用软件OFFICE或WPS软件打开。作品中的文字与图均可以修改和编辑, 图片更改请在作品中右键图片并更换,文字修改请直接点击文字进行修改,也可以新增和删除文档中的内容。
[版权声明] 本站所有资料为用户分享产生,若发现您的权利被侵害,请联系客服邮件isharekefu@iask.cn,我们尽快处理。 本作品所展示的图片、画像、字体、音乐的版权可能需版权方额外授权,请谨慎使用。 网站提供的党政主题相关内容(国旗、国徽、党徽..)目的在于配合国家政策宣传,仅限个人学习分享使用,禁止用于任何广告和商用目的。

历史搜索

    清空历史搜索