可乐瓶底的制作过程(应用CAXA制造工程师)

可乐瓶底的制作过程(应用CAXA制造工程师) 可乐瓶底的制作过程(应用CAXA制造工程师) 可乐瓶底的制作 2008-2-6 00:15 #1 200 Yuan, construction person in charge a fine of 50 Yuan. (8) no permit to work and the job in accordance with the provisions, on the job unit fined 300 yuan, the unit will charge a fine of 100 Yuan. 7.5.3 accident penalties (1) injuries fatalities directly punished 1~2 million. Direct responsibility for the accident and have the corresponding responsibility of leadership, such as concerning administrative sanctions, should be brought to the company or the relevant Department. (2) personal injury accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature 200 Yuan, construction person in charge a fine of 50 Yuan. (8) no permit to work and the job in accordance with the provisions, on the job unit fined 300 yuan, the unit will charge a fine of 100 Yuan. 7.5.3 accident penalties (1) injuries fatalities directly punished 1~2 million. Direct responsibility for the accident and have the corresponding responsibility of leadership, such as concerning administrative sanctions, should be brought to the company or the relevant Department. (2) personal injury accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature 造型思路: 可乐瓶底的曲面造型比较复杂，它有五个完全相同的部分。用实体造型不能完成，所以利用CAXA制造工程师曲面造型功能中的网格面来实现。其实我们只要作出一个突起的两根截面线和一个凹进的一根截面线，然后进行圆形阵列就可以得到其他几个突起和凹进的所有截面线。然后使用网格面功能生成五个相同部分的曲面。可乐瓶底的最下面的平面我们使用直纹面中的点，曲线方式来做，这样做的好处是在做加工时两张面(直纹面和网格面)可以一同用参数线加工。最后以瓶底的上口为准，构造一个立方体实体，然后用可乐瓶底的两张面把不需要的部分裁剪掉，就可以得到我们要求的凹模型腔。 绘制截面线 1( 按下【F7】键将绘图平面切换到XOZ平面。 2( 单击曲线工具中的“矩形”按钮 ，在界面左侧的立即菜单中选择“中心_长_宽”方式，输入长度42.5，宽度37，光标拾取到坐标原点，绘制一个42.5×37的矩形。 200 Yuan, construction person in charge a fine of 50 Yuan. (8) no permit to work and the job in accordance with the provisions, on the job unit fined 300 yuan, the unit will charge a fine of 100 Yuan. 7.5.3 accident penalties (1) injuries fatalities directly punished 1~2 million. Direct responsibility for the accident and have the corresponding responsibility of leadership, such as concerning administrative sanctions, should be brought to the company or the relevant Department. (2) personal injury accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature 3( 单击几何变换工具栏中的“平移”按钮 ，在立即菜单中输入DX,21.25，DZ, -18.5，然后拾取矩形的四条边，单击鼠标右键确认，将矩形的左上角平移到原点(0,0,0)。 4( 单击曲线工具栏中的“等距线”按钮 ，在立即菜单中输入距离3，拾取矩形的 最上面一条边，选择向下箭头为等距方向，生成距离为3的等距线，如图所示。 200 Yuan, construction person in charge a fine of 50 Yuan. (8) no permit to work and the job in accordance with the provisions, on the job unit fined 300 yuan, the unit will charge a fine of 100 Yuan. 7.5.3 accident penalties (1) injuries fatalities directly punished 1~2 million. Direct responsibility for the accident and have the corresponding responsibility of leadership, such as concerning administrative sanctions, should be brought to the company or the relevant Department. (2) personal injury accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature 5( 相同的等距方法，生成如图所示尺寸标注的各个等距线。 6( 单击曲面编辑工具栏中的“裁剪”按钮 ，拾取需要裁剪的线段，结果如左图所示，然后单击“删除”按钮 ，拾取需要删除的直线，按右键确认确认删除，结果如右图所示。 7( ?作过P1、P2点且与直线L1相切的圆弧。单击 “圆弧”按钮 ，选择“两点_半径”方式，拾取P1点和P2点，然后按空格键在弹出的点工具菜单中选择“切点”命令，拾取直线L1。 ?作过P4点且与直线L2相切，半径R为6的圆R6。单击 “整圆”按钮 ，拾取直线L2(上一步中点工具菜单中选中了“切点”命令)，切换点工具为“缺省点”命令，然后拾取P4点，按回车键输入半径6。 ?作过直线端点P3和圆R6的切点的直线。单击 “直线”按钮 ，拾取P3点，切换点工具菜单为“切点”命令，拾取圆R6上一点，得到切点P5。 注意:在绘图过程中注意切换点工具菜单中的命令，否则容易出现拾取不到需要点的现象。 200 Yuan, construction person in charge a fine of 50 Yuan. (8) no permit to work and the job in accordance with the provisions, on the job unit fined 300 yuan, the unit will charge a fine of 100 Yuan. 7.5.3 accident penalties (1) injuries fatalities directly punished 1~2 million. Direct responsibility for the accident and have the corresponding responsibility of leadership, such as concerning administrative sanctions, should be brought to the company or the relevant Department. (2) personal injury accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature 8( ?作与圆R6相切过点P5，半径为6的圆C1。单击 “整圆”按钮 ，选择“两点_半径”方式，切换点工具为“切点”命令，拾取R6圆;切换点工具为“端点”，拾取P5点;按回车键输入半径6。 ?作与圆弧C4相切，过直线L3与圆弧C4的交点，半径为6的圆C2。单击 “整圆”按钮 ，选择“两点_半径”方式，切换点工具为“切点”命令，拾取圆弧C4;切换点工具为“交点”命令，拾取L3和C4得到它们的交点;按回车键输入半径6。 ?作与圆C1和C2相切，半径为50的圆弧C3。单击 “圆弧”按钮 ，选择“两点_半径”方式，切换点工具为“切点”命令，拾取圆C1和C2，按回车键输入半径50。 9( 单击曲面编辑工具栏中的“裁剪”按钮 和“删除”按钮 ，去掉不需要的部分。在圆弧C4上单击鼠标右键选择“隐藏”命令，将其隐藏掉。 10( 按下F5键将绘图平面切换到XOY平面，然后再按F8显示其轴侧图。 11( 单击曲面编辑工具栏中的“平面旋转”按钮 ，在立即菜单中选择“拷贝”方式，输入角度41.6度，拾取坐标原点为旋转中心点，然后框选所有线段，单击右键确认， 12( 单击 “删除”按钮 ，删掉不需要的部分。按下Shift，方向键旋转视图。观察生成的第一条截面线。单击“曲线组合”按钮 ，拾取截面线，选择方向，将其组合一样条曲线。 至此，第一条截面线完成。因为作第一条截面线用的是拷贝旋转，所以完整地保留了原来绘制的图形，我们只需要稍加编辑就可以完成第二条截面线 13( 按F7将绘图平面切换到XOZ面内。单击“线面可见”按钮 ，显示前面隐藏掉的圆弧C4，并拾取确认。然后拾取第一条截面线单击右键选择“隐藏”命令，将其隐藏掉 200 Yuan, construction person in charge a fine of 50 Yuan. (8) no permit to work and the job in accordance with the provisions, on the job unit fined 300 yuan, the unit will charge a fine of 100 Yuan. 7.5.3 accident penalties (1) injuries fatalities directly punished 1~2 million. Direct responsibility for the accident and have the corresponding responsibility of leadership, such as concerning administrative sanctions, should be brought to the company or the relevant Department. (2) personal injury accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature