上海雷迅防雷产品参数说明

上海雷迅防雷产品参数说明 一、AM1-80/4模块化限压型电源电涌保护器 产品介绍 AM1-80/4模块化电源电涌保护器依据IEC和GB设计，AM系列低压配电系统电涌保护器具备强大的电涌泄放能力，每位的最大放电电流 80kA(8/20μs)，适用于低压配电系统的各级保护，依据不同的配电系统(TT/TN/IT)可选择多种组合方式。 高能电涌保护 内置瞬间过流断路装置 遥信报警接口 可插拔更换模块 失效检测指示 单模块最大放电电流80kA(8/20μs) 标准模块化安装 内置过热断路装置 -9反应速度:10秒级 插拔防呆设计 产品适用范围 1. AM1-80/4: 电源线路屏蔽埋地输入的建筑物的总配电柜 2.建筑物内有室外进出线路输入的配电箱 3.室外配电柜/配电箱 产品尺寸和原理示意图 tablets cover, placed overnight, reset electric Board Shang slowly heating to digest liquid colorless transparent, and appeared large perchlorate smoke, removed tapered bottle, joined 0.5 mL sulfuric acid, Without glass cover. reset appropriately elevated temperature remove perchlorate on the heating plates. Add 10 mL~15 mL of water, heat to boiling. After taking down cold volume to 50 mL with water, if the dilution of the sample is different, should ensure that samples containing 1% sulfate in solution. While two reagent blanks. Determination of drawing 5, 0.0,0.5,1.0,2.0,3.0,4.0,6.0mL aluminium standard solution (the equivalent of aluminium-containing 0,0.5,1.0,2.0,4.0,6.0 μg g) were placed in a 25 mL colorimetric tube. In turn each tube add l mL sulfuric acid solution l%. 吸 ... Pathogenic bacteria (salmonella, Shigella, Staphylococcus), GB/T4789.4, GB/T4789.5, GB/T4789.10, mold yeast ticket GB7718 starch and starch products inspection and testing the senses taking 50 grams or more of samples placed in a white porcelain plates, in natural light with eye color, nose and smelling and tasting it. Test 1, definition of net content of starch water and starch water principle: starch samples dry weight loss. Sample weight loss weight expressed as a percentage of the original weight of the sample. This standard applies to 130 c, 1 starch starch property stability samples at atmospheric pressure. Principle: the samples at a temperature of 130-133 c, an atmospheric pressure of electric heating in the oven-drying 90min, get the sample weight loss. 2, instruments and analytical balance; Metal plate: not under the influence of starch in the test conditions. Dish should be evenly distributed on the surface the test samples shall not exceed 0.3G/cm2. The specifications for the diameter 55-65mm, high 15-30mm, wall 型号 AM1-80/4 SPD端口 一端口 SPD类别 限压型 电源系统 TT-TN-IT 额定电压 Un 220V 最大持续运行电压 Uc 385V 标称放电电流 In(8/20μs) 40kA 最大放电电流 80kA Imax(8/20μs) 保护水平 Up(8/20μs) <2.5kV 推荐串接过流保护装置 63A/35kA 响应时间 ?25ns 尺寸 2mods,DIN43880 失效指示 绿色:正常 红色:失效 2安装导线截面积 16-35mm 安装方式 35mm标准导轨(EN50022/DIN46277-3) 0工作环境温度 -40/85C 外壳 热塑材料，符合UL94 V-0 外壳保护等级 IP20 认证 CE RoHS 遥信报警 常开/常闭触点端子(可选) 2遥信终端的横截面积 最大1.5mm单股线/软线 tablets cover, placed overnight, reset electric Board Shang slowly heating to digest liquid colorless transparent, and appeared large perchlorate smoke, removed tapered bottle, joined 0.5 mL sulfuric acid, Without glass cover. reset appropriately elevated temperature remove perchlorate on the heating plates. Add 10 mL~15 mL of water, heat to boiling. After taking down cold volume to 50 mL with water, if the dilution of the sample is different, should ensure that samples containing 1% sulfate in solution. While two reagent blanks. Determination of drawing 5, 0.0,0.5,1.0,2.0,3.0,4.0,6.0mL aluminium standard solution (the equivalent of aluminium-containing 0,0.5,1.0,2.0,4.0,6.0 μg g) were placed in a 25 mL colorimetric tube. In turn each tube add l mL sulfuric acid solution l%. 吸 ... Pathogenic bacteria (salmonella, Shigella, Staphylococcus), GB/T4789.4, GB/T4789.5, GB/T4789.10, mold yeast ticket GB7718 starch and starch products inspection and testing the senses taking 50 grams or more of samples placed in a white porcelain plates, in natural light with eye color, nose and smelling and tasting it. Test 1, definition of net content of starch water and starch water principle: starch samples dry weight loss. Sample weight loss weight expressed as a percentage of the original weight of the sample. This standard applies to 130 c, 1 starch starch property stability samples at atmospheric pressure. Principle: the samples at a temperature of 130-133 c, an atmospheric pressure of electric heating in the oven-drying 90min, get the sample weight loss. 2, instruments and analytical balance; Metal plate: not under the influence of starch in the test conditions. Dish should be evenly distributed on the surface the test samples shall not exceed 0.3G/cm2. The specifications for the diameter 55-65mm, high 15-30mm, wall 二、AM1-120模块化限压型大通流电源电涌保护器 产品介绍 AM系列模块化大通流电源电涌保护器依据IEC和GB标准设计，应用于电源供电系统的第一级电源电涌保护产品。模块为标准35mm导轨式安装方式。具备很高的电涌流泄放能力，最大放电电流可达120kA(8/20μs)，应用于雷击风险较高地区的设备系统的电源第一级电涌保护。 无续流,避免了普通间隙式SPD浪涌过后灭弧瞬间掉电问题，漏电流小。产品安装简便，积木式可插拔更换模块，并且具有防呆功能，通过不同角度的防呆插口(孔)有效的防止了不同电压模块与底座误插。通过不同数量的组合可适用于单相/三相供电线路,通过与AM1-NPE或ASafe-NPE模块配合可组成“零地保护”模式。 高能电涌保护 内置瞬间过流断路装置 遥信报警接口 可插拔更换模块 失效检测指示 单模块最大放电电流120kA(8/20μs) 标准模块化安装 内置过热断路装置 反应速度:10-9秒级 插拔防呆设计 产品适用范围 1.电源线路屏蔽埋地输入的建筑物的总配电柜 2.建筑物内有室外进出线路输入的配电箱 3.室外配电柜/配电箱 产品尺寸和原理示意图 tablets cover, placed overnight, reset electric Board Shang slowly heating to digest liquid colorless transparent, and appeared large perchlorate smoke, removed tapered bottle, joined 0.5 mL sulfuric acid, Without glass cover. reset appropriately elevated temperature remove perchlorate on the heating plates. Add 10 mL~15 mL of water, heat to boiling. After taking down cold volume to 50 mL with water, if the dilution of the sample is different, should ensure that samples containing 1% sulfate in solution. While two reagent blanks. Determination of drawing 5, 0.0,0.5,1.0,2.0,3.0,4.0,6.0mL aluminium standard solution (the equivalent of aluminium-containing 0,0.5,1.0,2.0,4.0,6.0 μg g) were placed in a 25 mL colorimetric tube. In turn each tube add l mL sulfuric acid solution l%. 吸 ... Pathogenic bacteria (salmonella, Shigella, Staphylococcus), GB/T4789.4, GB/T4789.5, GB/T4789.10, mold yeast ticket GB7718 starch and starch products inspection and testing the senses taking 50 grams or more of samples placed in a white porcelain plates, in natural light with eye color, nose and smelling and tasting it. Test 1, definition of net content of starch water and starch water principle: starch samples dry weight loss. Sample weight loss weight expressed as a percentage of the original weight of the sample. This standard applies to 130 c, 1 starch starch property stability samples at atmospheric pressure. Principle: the samples at a temperature of 130-133 c, an atmospheric pressure of electric heating in the oven-drying 90min, get the sample weight loss. 2, instruments and analytical balance; Metal plate: not under the influence of starch in the test conditions. Dish should be evenly distributed on the surface the test samples shall not exceed 0.3G/cm2. The specifications for the diameter 55-65mm, high 15-30mm, wall 型号 AM1-120 SPD端口 一端口 SPD类别 限压型 电源系统 TT-TN-IT 额定电压Un 220V 最大持续运行电压Uc 385V 标称放电电流In(8/20μs) 60kA 最大放电电流Imax(8/20μs) 120kA 保护水平Up(8/20μs) <2.5kV 推荐串接过流保护装置 63A/35kA 响应时间 ?25ns 尺寸 2mods,DIN43880 失效指示 绿色:正常 红色:失效 安装导线截面积 16-35mm2 安装方式 35mm标准导轨(EN50022/DIN46277-3) 0工作环境温度 -40/85C 外壳材料 热塑材料，符合UL94 V-0 外壳保护等级 IP20 认证 CE RoHS 遥信报警 常开/常闭触点端子(可选) 2遥信终端的横截面积 最大1.5mm单股线/软线 tablets cover, placed overnight, reset electric Board Shang slowly heating to digest liquid colorless transparent, and appeared large perchlorate smoke, removed tapered bottle, joined 0.5 mL sulfuric acid, Without glass cover. reset appropriately elevated temperature remove perchlorate on the heating plates. Add 10 mL~15 mL of water, heat to boiling. After taking down cold volume to 50 mL with water, if the dilution of the sample is different, should ensure that samples containing 1% sulfate in solution. While two reagent blanks. Determination of drawing 5, 0.0,0.5,1.0,2.0,3.0,4.0,6.0mL aluminium standard solution (the equivalent of aluminium-containing 0,0.5,1.0,2.0,4.0,6.0 μg g) were placed in a 25 mL colorimetric tube. In turn each tube add l mL sulfuric acid solution l%. 吸 ... Pathogenic bacteria (salmonella, Shigella, Staphylococcus), GB/T4789.4, GB/T4789.5, GB/T4789.10, mold yeast ticket GB7718 starch and starch products inspection and testing the senses taking 50 grams or more of samples placed in a white porcelain plates, in natural light with eye color, nose and smelling and tasting it. Test 1, definition of net content of starch water and starch water principle: starch samples dry weight loss. Sample weight loss weight expressed as a percentage of the original weight of the sample. This standard applies to 130 c, 1 starch starch property stability samples at atmospheric pressure. Principle: the samples at a temperature of 130-133 c, an atmospheric pressure of electric heating in the oven-drying 90min, get the sample weight loss. 2, instruments and analytical balance; Metal plate: not under the influence of starch in the test conditions. Dish should be evenly distributed on the surface the test samples shall not exceed 0.3G/cm2. The specifications for the diameter 55-65mm, high 15-30mm, wall 三、ASafe-15模块化开关型电源电涌保护器 产品介绍 ASafe电压开关型系列一级模块化电源电涌保护器依据IEC和GB标准设计。 应用于电源供电系统第一级的电涌保护，产品为标准35mm导轨式安装方式。 ASafe电压开关型系列模块化电源电涌保护器具备很高的雷电流泄放能力，单模块冲击电 流最大可达15kA(10/350μs)，可防范直击雷在内的各种电涌，应用于雷击风险较高地区的设 备系统的电源第一级电涌保护，可组合用于单相/三相供电线路。 ASafe电压开关型无续流、避免普通间隙式SPD浪涌过后灭弧瞬间掉电问题，同时无漏电 流(或极小) 产品特性 泄放能量大 安全系数高 无漏电流 使用寿命长 无续流 抗环境能力强 模块化安装 电压保护水平小于2000V 产品适用范围 1.建筑物内总配电屏 2.建筑物内架空输入的配电箱 3.室外配电柜/配电箱 产品性能参数 型号 ASafe-15 SPD端口 一端口 SPD类别 电压开关型 电源系统 TT-TN-IT 额定电压Un 220V 最大持续运行电压Uc 320V tablets cover, placed overnight, reset electric Board Shang slowly heating to digest liquid colorless transparent, and appeared large perchlorate smoke, removed tapered bottle, joined 0.5 mL sulfuric acid, Without glass cover. reset appropriately elevated temperature remove perchlorate on the heating plates. Add 10 mL~15 mL of water, heat to boiling. After taking down cold volume to 50 mL with water, if the dilution of the sample is different, should ensure that samples containing 1% sulfate in solution. While two reagent blanks. Determination of drawing 5, 0.0,0.5,1.0,2.0,3.0,4.0,6.0mL aluminium standard solution (the equivalent of aluminium-containing 0,0.5,1.0,2.0,4.0,6.0 μg g) were placed in a 25 mL colorimetric tube. In turn each tube add l mL sulfuric acid solution l%. 吸 ... Pathogenic bacteria (salmonella, Shigella, Staphylococcus), GB/T4789.4, GB/T4789.5, GB/T4789.10, mold yeast ticket GB7718 starch and starch products inspection and testing the senses taking 50 grams or more of samples placed in a white porcelain plates, in natural light with eye color, nose and smelling and tasting it. Test 1, definition of net content of starch water and starch water principle: starch samples dry weight loss. Sample weight loss weight expressed as a percentage of the original weight of the sample. This standard applies to 130 c, 1 starch starch property stability samples at atmospheric pressure. Principle: the samples at a temperature of 130-133 c, an atmospheric pressure of electric heating in the oven-drying 90min, get the sample weight loss. 2, instruments and analytical balance; Metal plate: not under the influence of starch in the test conditions. Dish should be evenly distributed on the surface the test samples shall not exceed 0.3G/cm2. The specifications for the diameter 55-65mm, high 15-30mm, wall 绝缘阻抗 >100M ohm 冲击放电电流Iimp(10/350μs) 15kA 保护水平Up(1.2/50μs) 2kV 响应时间tA ?100ns 尺寸 2mods,DIN43880 安装导线截面积 16-35mm2 安装方式 35mm标准导轨(EN50022/DIN46277-3) 0工作环境温度 -40/85C 外壳材料 热塑材料，符合UL94 V-0 外壳防护等级 IP20 认证 RoHS 四、AM2-40/4模块化限压型电源电涌保护器 产品介绍 AM2-40/4模块化电源电涌保护器依据IEC和GB标准设计，AM系列低压配电系统电涌保护 器具备强大的电涌泄放能力，每位的最大放电电流 40kA(8/20μs)，适用于低压配电系统的 各级保护，依据不同的配电系统(TT/TN/IT)可选择多种组合方式。 高能电涌保护 内置瞬间过流断路装置 遥信报警接口 可插拔更换模块 失效检测指示 单模块最大放电电流40kA(8/20μs) 标准模块化安装 内置过热断路装置 -9反应速度:10秒级 插拔防呆设计 产品适用范围 1. AM2-40/4: 建筑物层配电箱 2. AM-NPE:适用于3+1/1+1接线模式下配电箱及重要设备配电箱 产品尺寸和原理示意图 tablets cover, placed overnight, reset electric Board Shang slowly heating to digest liquid colorless transparent, and appeared large perchlorate smoke, removed tapered bottle, joined 0.5 mL sulfuric acid, Without glass cover. reset appropriately elevated temperature remove perchlorate on the heating plates. Add 10 mL~15 mL of water, heat to boiling. After taking down cold volume to 50 mL with water, if the dilution of the sample is different, should ensure that samples containing 1% sulfate in solution. While two reagent blanks. Determination of drawing 5, 0.0,0.5,1.0,2.0,3.0,4.0,6.0mL aluminium standard solution (the equivalent of aluminium-containing 0,0.5,1.0,2.0,4.0,6.0 μg g) were placed in a 25 mL colorimetric tube. In turn each tube add l mL sulfuric acid solution l%. 吸 ... Pathogenic bacteria (salmonella, Shigella, Staphylococcus), GB/T4789.4, GB/T4789.5, GB/T4789.10, mold yeast ticket GB7718 starch and starch products inspection and testing the senses taking 50 grams or more of samples placed in a white porcelain plates, in natural light with eye color, nose and smelling and tasting it. Test 1, definition of net content of starch water and starch water principle: starch samples dry weight loss. Sample weight loss weight expressed as a percentage of the original weight of the sample. This standard applies to 130 c, 1 starch starch property stability samples at atmospheric pressure. Principle: the samples at a temperature of 130-133 c, an atmospheric pressure of electric heating in the oven-drying 90min, get the sample weight loss. 2, instruments and analytical balance; Metal plate: not under the influence of starch in the test conditions. Dish should be evenly distributed on the surface the test samples shall not exceed 0.3G/cm2. The specifications for the diameter 55-65mm, high 15-30mm, wall 型号 AM2-40/4 SPD端口 一端口 SPD类别 限压型 电源系统 TT-TN-IT 额定电压Un 220V 最大持续运行电压Uc 385V 标称放电电流In(8/20μs)\ 20kA 最大放电电流Imax(8/20μs) 40kA 保护水平Up(8/20μs) <1.8kV 推荐串接过流保护装置 32A/10kA 响应时间 ?25ns 尺寸 2mods,DIN43880 失效指示 绿色:正常 红色:失效 2安装导线截面积 10-35mm 安装方式 35mm标准导轨(EN50022/DIN46277-3) 0工作环境温度 -40/85C 外壳材料 热塑材料，符合UL94 V-0 外壳保护等级 IP20 认证 CE RoHS 遥信报警 常开/常闭触点端子(可选) 2遥信终端的横截面积 最大1.5mm单股线/软线 tablets cover, placed overnight, reset electric Board Shang slowly heating to digest liquid colorless transparent, and appeared large perchlorate smoke, removed tapered bottle, joined 0.5 mL sulfuric acid, Without glass cover. reset appropriately elevated temperature remove perchlorate on the heating plates. Add 10 mL~15 mL of water, heat to boiling. After taking down cold volume to 50 mL with water, if the dilution of the sample is different, should ensure that samples containing 1% sulfate in solution. While two reagent blanks. Determination of drawing 5, 0.0,0.5,1.0,2.0,3.0,4.0,6.0mL aluminium standard solution (the equivalent of aluminium-containing 0,0.5,1.0,2.0,4.0,6.0 μg g) were placed in a 25 mL colorimetric tube. In turn each tube add l mL sulfuric acid solution l%. 吸 ... Pathogenic bacteria (salmonella, Shigella, Staphylococcus), GB/T4789.4, GB/T4789.5, GB/T4789.10, mold yeast ticket GB7718 starch and starch products inspection and testing the senses taking 50 grams or more of samples placed in a white porcelain plates, in natural light with eye color, nose and smelling and tasting it. Test 1, definition of net content of starch water and starch water principle: starch samples dry weight loss. Sample weight loss weight expressed as a percentage of the original weight of the sample. This standard applies to 130 c, 1 starch starch property stability samples at atmospheric pressure. Principle: the samples at a temperature of 130-133 c, an atmospheric pressure of electric heating in the oven-drying 90min, get the sample weight loss. 2, instruments and analytical balance; Metal plate: not under the influence of starch in the test conditions. Dish should be evenly distributed on the surface the test samples shall not exceed 0.3G/cm2. The specifications for the diameter 55-65mm, high 15-30mm, wall 五、AM3-20/4模块化限压型电源电涌保护器 产品介绍 AM3-20/4模块化电源电涌保护器依据IEC和GB标准设计，AM系列低压配电系统电涌保护器具备强大的电涌泄放能力，每位的最大放电电流 20kA(8/20μs)，适用于低压配电系统的各级保护，依据不同的配电系统(TT/TN/IT)可选择多种组合方式。 高能电涌保护 内置瞬间过流断路装置 遥信报警接口 可插拔更换模块 失效检测指示 单模块最大放电电流20kA(8/20μs) 标准模块化安装 内置过热断路装置 -9反应速度:10秒级 插拔防呆设计 产品适用范围 1. AM3-20/4: 建筑物层配电箱 2. AM-NPE:适用于3+1/1+1接线模式下配电箱及重要设备配电箱 产品尺寸和原理示意图 型号 AM3-20/4 SPD端口 一端口 SPD类别 限压型 tablets cover, placed overnight, reset electric Board Shang slowly heating to digest liquid colorless transparent, and appeared large perchlorate smoke, removed tapered bottle, joined 0.5 mL sulfuric acid, Without glass cover. reset appropriately elevated temperature remove perchlorate on the heating plates. Add 10 mL~15 mL of water, heat to boiling. After taking down cold volume to 50 mL with water, if the dilution of the sample is different, should ensure that samples containing 1% sulfate in solution. While two reagent blanks. Determination of drawing 5, 0.0,0.5,1.0,2.0,3.0,4.0,6.0mL aluminium standard solution (the equivalent of aluminium-containing 0,0.5,1.0,2.0,4.0,6.0 μg g) were placed in a 25 mL colorimetric tube. In turn each tube add l mL sulfuric acid solution l%. 吸 ... Pathogenic bacteria (salmonella, Shigella, Staphylococcus), GB/T4789.4, GB/T4789.5, GB/T4789.10, mold yeast ticket GB7718 starch and starch products inspection and testing the senses taking 50 grams or more of samples placed in a white porcelain plates, in natural light with eye color, nose and smelling and tasting it. Test 1, definition of net content of starch water and starch water principle: starch samples dry weight loss. Sample weight loss weight expressed as a percentage of the original weight of the sample. This standard applies to 130 c, 1 starch starch property stability samples at atmospheric pressure. Principle: the samples at a temperature of 130-133 c, an atmospheric pressure of electric heating in the oven-drying 90min, get the sample weight loss. 2, instruments and analytical balance; Metal plate: not under the influence of starch in the test conditions. Dish should be evenly distributed on the surface the test samples shall not exceed 0.3G/cm2. The specifications for the diameter 55-65mm, high 15-30mm, wall 电源系统 TT-TN-IT 额定电压 Un 220V 最大持续运行电压 Uc 385V 标称放电电流 In(8/20μs) 10kA 最大放电电流 Imax(8/20μs) 20kA 保护水平 UP(8/20μs) <1.5kV 推荐串接过流保护装置 16A/6kA 响应时间 ?25ns 尺寸 2mods,DIN43880 失效指示 绿色:正常 红色:失效 2安装导线截面积 6-35mm 安装方式 35mm标准导轨(EN50022/DIN46277-3) 0工作环境温度 -40/85C 外壳材料 热塑材料，符合UL94 V-0 外壳保护等级 IP20 认证 CE RoHS 遥信报警 常开/常闭触点端子(可选) 2遥信终端的横截面积 最大1.5mm单股线/软线 六、A6系列电源转换电涌保护器 产品介绍 A6系列电源转换电涌保护器依据IEC和GB标准设计，用于设备末端电源电涌保护，采用共模、差模保护，插座式配置将电涌保护器与电源转换器完美组合，RFI/EMI滤波电路及级间协调电感，可吸收射频/电磁干扰等线路电涌，延长设备正常工作寿命，降低长期运行成本。 信号电涌保护 错相及接地状态智能指示 过流、过载保护 EMI/RFI噪声抑制 线路过热自动保护 超宽工作电压范围 电源指示 5000次插拔无故障 电涌保护状态指示 两种灵活、可靠的接地方式 带独立接地螺丝 零-地电压过高智能指示 tablets cover, placed overnight, reset electric Board Shang slowly heating to digest liquid colorless transparent, and appeared large perchlorate smoke, removed tapered bottle, joined 0.5 mL sulfuric acid, Without glass cover. reset appropriately elevated temperature remove perchlorate on the heating plates. Add 10 mL~15 mL of water, heat to boiling. After taking down cold volume to 50 mL with water, if the dilution of the sample is different, should ensure that samples containing 1% sulfate in solution. While two reagent blanks. Determination of drawing 5, 0.0,0.5,1.0,2.0,3.0,4.0,6.0mL aluminium standard solution (the equivalent of aluminium-containing 0,0.5,1.0,2.0,4.0,6.0 μg g) were placed in a 25 mL colorimetric tube. In turn each tube add l mL sulfuric acid solution l%. 吸 ... Pathogenic bacteria (salmonella, Shigella, Staphylococcus), GB/T4789.4, GB/T4789.5, GB/T4789.10, mold yeast ticket GB7718 starch and starch products inspection and testing the senses taking 50 grams or more of samples placed in a white porcelain plates, in natural light with eye color, nose and smelling and tasting it. Test 1, definition of net content of starch water and starch water principle: starch samples dry weight loss. Sample weight loss weight expressed as a percentage of the original weight of the sample. This standard applies to 130 c, 1 starch starch property stability samples at atmospheric pressure. Principle: the samples at a temperature of 130-133 c, an atmospheric pressure of electric heating in the oven-drying 90min, get the sample weight loss. 2, instruments and analytical balance; Metal plate: not under the influence of starch in the test conditions. Dish should be evenly distributed on the surface the test samples shall not exceed 0.3G/cm2. The specifications for the diameter 55-65mm, high 15-30mm, wall 产品适用范围 1.弱电机房环境:计算机机房设备、监控机房设备、消防机房设备、 电话机房设备、其它弱电类机房设备. 2.办公环境:电脑、传真机、复印机、其它办公用电设备. 3.家庭环境:电视机、投影机、家庭音响、家用电脑、电话机、拨号网络设备 型号 A6-42-0NS SPD端口 两端口 SPD类别 组合型 电源系统 220V交流单相供电系统 额定电压Un 220V 最大持续运行电压Uc 320V 额定负载电流IL 10A 额定功率 2000W 总标称放电电流In(8/20μs) 9kA 每线标称放电电流In(8/20μs) 3kA /3kA /3kA (L-N /-LG /N-G) 总最大放电电流Imax(8/20μs) 18kA 每线最大放电电流6kA/ 6kA/ 6kA (L-N/ -LG/ N-G) Imax(8/20μs) 保护水平Up(8/20μs) <1.3kV RFI/EMI滤波 uln15k-20MHz 4-40dB 响应时间 ?25ns 连接导线 10A/250V 3芯; 1.5米长 失效指示 绿色:正常 熄灭:失效 tablets cover, placed overnight, reset electric Board Shang slowly heating to digest liquid colorless transparent, and appeared large perchlorate smoke, removed tapered bottle, joined 0.5 mL sulfuric acid, Without glass cover. reset appropriately elevated temperature remove perchlorate on the heating plates. Add 10 mL~15 mL of water, heat to boiling. After taking down cold volume to 50 mL with water, if the dilution of the sample is different, should ensure that samples containing 1% sulfate in solution. While two reagent blanks. Determination of drawing 5, 0.0,0.5,1.0,2.0,3.0,4.0,6.0mL aluminium standard solution (the equivalent of aluminium-containing 0,0.5,1.0,2.0,4.0,6.0 μg g) were placed in a 25 mL colorimetric tube. In turn each tube add l mL sulfuric acid solution l%. 吸 ... Pathogenic bacteria (salmonella, Shigella, Staphylococcus), GB/T4789.4, GB/T4789.5, GB/T4789.10, mold yeast ticket GB7718 starch and starch products inspection and testing the senses taking 50 grams or more of samples placed in a white porcelain plates, in natural light with eye color, nose and smelling and tasting it. Test 1, definition of net content of starch water and starch water principle: starch samples dry weight loss. Sample weight loss weight expressed as a percentage of the original weight of the sample. This standard applies to 130 c, 1 starch starch property stability samples at atmospheric pressure. Principle: the samples at a temperature of 130-133 c, an atmospheric pressure of electric heating in the oven-drying 90min, get the sample weight loss. 2, instruments and analytical balance; Metal plate: not under the influence of starch in the test conditions. Dish should be evenly distributed on the surface the test samples shall not exceed 0.3G/cm2. The specifications for the diameter 55-65mm, high 15-30mm, wall 输出插孔 国标3P/国标2P 安装方式 墙面蝴蝶孔固定或水平固定(放置) 0工作环境温度 -40/85C 外壳材料 热塑材料，符合UL94 V-0 外壳保护等级 IP20 认证 RoHS tablets cover, placed overnight, reset electric Board Shang slowly heating to digest liquid colorless transparent, and appeared large perchlorate smoke, removed tapered bottle, joined 0.5 mL sulfuric acid, Without glass cover. reset appropriately elevated temperature remove perchlorate on the heating plates. Add 10 mL~15 mL of water, heat to boiling. After taking down cold volume to 50 mL with water, if the dilution of the sample is different, should ensure that samples containing 1% sulfate in solution. While two reagent blanks. Determination of drawing 5, 0.0,0.5,1.0,2.0,3.0,4.0,6.0mL aluminium standard solution (the equivalent of aluminium-containing 0,0.5,1.0,2.0,4.0,6.0 μg g) were placed in a 25 mL colorimetric tube. In turn each tube add l mL sulfuric acid solution l%. 吸 ... Pathogenic bacteria (salmonella, Shigella, Staphylococcus), GB/T4789.4, GB/T4789.5, GB/T4789.10, mold yeast ticket GB7718 starch and starch products inspection and testing the senses taking 50 grams or more of samples placed in a white porcelain plates, in natural light with eye color, nose and smelling and tasting it. Test 1, definition of net content of starch water and starch water principle: starch samples dry weight loss. Sample weight loss weight expressed as a percentage of the original weight of the sample. This standard applies to 130 c, 1 starch starch property stability samples at atmospheric pressure. Principle: the samples at a temperature of 130-133 c, an atmospheric pressure of electric heating in the oven-drying 90min, get the sample weight loss. 2, instruments and analytical balance; Metal plate: not under the influence of starch in the test conditions. Dish should be evenly distributed on the surface the test samples shall not exceed 0.3G/cm2. The specifications for the diameter 55-65mm, high 15-30mm, wall